The Org Manual ¶

1.1 Summary ¶

Org Mode is an authoring tool and a TODO lists manager for GNU Emacs. It relies on a lightweight plain-text markup language used in files with the ‘.org’ extension.

As an authoring tool, Org helps you write structured documents and provides exporting facilities. Org files can also be used for literate programming and reproducible research. As a TODO lists manager, Org helps you organize your tasks in a flexible way, from daily needs to detailed project-planning, allowing logging, multiple views on your tasks, exporting your agendas, etc.

Org mode is implemented on top of Outline mode, which makes it possible to keep the content of large files well structured. Visibility cycling and structure editing help to work with the tree. Tables are easily created with a built-in table editor. Plain text URL-like links connect to websites, emails, Usenet messages, BBDB entries, and any files related to the projects.

Org develops organizational tasks around notes files that contain lists or information about projects as plain text. Project planning and task management make use of metadata which is part of an outline node. Based on this data, specific entries can be extracted in queries and create dynamic agenda views that also integrate the Emacs calendar and diary. Org can be used to implement many different project planning schemes, such as David Allen’s GTD system.

Org files can serve as a single source authoring system with export to many different formats such as HTML, LaTeX, Open Document, and Markdown. New export backends can be derived from existing ones, or defined from scratch.

Org files can include source code blocks, which makes Org uniquely suited for authoring technical documents with code examples. Org source code blocks are fully functional; they can be evaluated in place and their results can be captured in the file. This makes it possible to create a single file reproducible research compendium.

Org keeps simple things simple. When first fired up, it should feel like a straightforward, easy to use outliner. Complexity is not imposed, but a large amount of functionality is available when needed. Org is a toolbox. Many users actually run only a—very personal—fraction of Org’s capabilities, and know that there is more whenever they need it.

All of this is achieved with strictly plain text files, the most portable and future-proof file format. Org runs in Emacs. Emacs is one of the most widely ported programs, so that Org mode is available on every major platform.

There is a website for Org which provides links to the newest version of Org, as well as additional information, frequently asked questions (FAQ), links to tutorials, etc. This page is located at https://orgmode.org.

An earlier version (7.3) of this manual was available as a paperback book from the Network Theory Ltd. publishing company, closed in 2009.

1.2 Installation ¶

Org is included in distributions of GNU Emacs, you probably do not need to install it. Most users will simply activate Org and begin exploring its features.

If, for one reason or another, you want to install Org on top of this pre-packaged version, you can use the Emacs package system or clone Org’s git repository. We strongly recommend sticking to a single installation method.

When installing Org on top of the pre-packaged version, please note that Org stable versions are meant to be fully compatible with the last three stable versions of Emacs but not with older Emacsen.

Using Emacs packaging system ¶

Recent Emacs distributions include a packaging system which lets you install Elisp libraries. You can install Org from the “package menu”, with M-x list-packages. See Package Menu.

Important: You need to do this in a session where no ‘.org’ file has been visited, i.e., where no Org built-in function have been loaded. Otherwise autoload Org functions will mess up the installation.

Using Org’s git repository ¶

You can clone Org’s repository and install Org like this:

$ cd ~/src/
$ git clone https://git.savannah.gnu.org/git/emacs/org-mode.git
$ cd org-mode/
$ make autoloads

Note that in this case, ‘make autoloads’ is mandatory: it defines Org’s version in ‘org-version.el’ and Org’s autoloads in ‘org-loaddefs.el’.

Make sure you set the load path correctly in your Emacs init file:

(add-to-list 'load-path "~/src/org-mode/lisp")

You can also compile with ‘make’, generate the documentation with ‘make doc’, create a local configuration with ‘make config’ and install Org with ‘make install’. Please run ‘make help’ to get the list of compilation/installation options.

For more detailed explanations on Org’s build system, please check the Org Build System page on Worg.

Installing Org’s contributed packages ¶

Org’s repository used to contain ‘contrib/’ directory for add-ons contributed by others. As of Org 9.5, the directory has been moved to the dedicated org-contrib repository, which you can install separately as a package from NonGNU ELPA.

There are enough valuable packages maintained outside of the Org repository. Worg has a list of org-contrib and external packages, certainly it is not exhaustive.

1.3 Activation ¶

Org mode buffers need Font Lock to be turned on: this is the default in Emacs¹.

There are compatibility issues between Org mode and some other Elisp packages (see Packages that conflict with Org mode). Please take the time to check the list.

For a better experience, the three Org commands org-store-link, org-capture and org-agenda ought to be accessible anywhere in Emacs, not just in Org buffers. To that effect, you need to bind them to globally available keys, like the ones reserved for users (see (elisp)Key Binding Conventions). Here are suggested bindings, please modify the keys to your own liking.

(global-set-key (kbd "C-c l") #'org-store-link)
(global-set-key (kbd "C-c a") #'org-agenda)
(global-set-key (kbd "C-c c") #'org-capture)

Files with the ‘.org’ extension use Org mode by default. To turn on Org mode in a file that does not have the extension ‘.org’, make the first line of a file look like this:

MY PROJECTS    -*- mode: org; -*-

which selects Org mode for this buffer no matter what the file’s name is. See also the variable org-insert-mode-line-in-empty-file.

Many commands in Org work on the region if the region is active. To make use of this, you need to have Transient Mark mode turned on, which is the default. If you do not like it, you can create an active region by using the mouse to select a region, or pressing C-SPC twice before moving point.

1.4 Feedback ¶

If you find problems with Org, or if you have questions, remarks, or ideas about it, please send an email to the Org mailing list emacs-orgmode@gnu.org. You can subscribe to the list from this web page. If you are not a member of the mailing list, your mail will be passed to the list after a moderator has approved it². We ask you to read and respect the GNU Kind Communications Guidelines when sending messages on this mailing list. Please allow up to one month for the response and followup if no response is received on the bug report.

For bug reports, please first try to reproduce the bug with the latest version of Org available—if you are running an outdated version, it is quite possible that the bug has been fixed already. If the bug persists, prepare a report and provide as much information as possible, including the version information of Emacs (M-x emacs-version) and Org (M-x org-version), as well as the Org related setup in the Emacs init file. The easiest way to do this is to use the command

M-x org-submit-bug-report <RET>

which puts all this information into an Emacs mail buffer so that you only need to add your description. If you are not sending the Email from within Emacs, please copy and paste the content into your Email program.

Sometimes you might face a problem due to an error in your Emacs or Org mode setup. Before reporting a bug, it is very helpful to start Emacs with minimal customizations and reproduce the problem. Doing so often helps you determine if the problem is with your customization or with Org mode itself. You can start a typical minimal session with a command like the example below.

$ emacs -Q -l /path/to/minimal-org.el

However if you are using Org mode as distributed with Emacs, a minimal setup is not necessary. In that case it is sufficient to start Emacs as ‘emacs -Q’. The ‘minimal-org.el’ setup file can have contents as shown below.

;;; Minimal setup to load latest `org-mode'.

;; Activate debugging.
(setq debug-on-error t
      debug-on-signal nil
      debug-on-quit nil)

;; Add latest Org mode to load path.
(add-to-list 'load-path (expand-file-name "/path/to/org-mode/lisp"))

If you are using Org mode version from Git repository, you can start minimal session using make.

# Bare Emacs
make repro
# or pass extra arguments
make repro REPRO_ARGS="-l /path/to/minimal/config.el /tmp/bug.org"

If an error occurs, a “backtrace” can be very useful—see below on how to create one. Often a small example file helps, along with clear information about:

1. What exactly did you do?
2. What did you expect to happen?
3. What happened instead?

Thank you for helping to improve this program.

How to create a useful backtrace ¶

If working with Org produces an error with a message you do not understand, you may have hit a bug. The best way to report this is by providing, in addition to what was mentioned above, a backtrace. This is information from the built-in debugger about where and how the error occurred. Here is how to produce a useful backtrace:

1. Reload uncompiled versions of all Org mode Lisp files. The backtrace contains much more information if it is produced with uncompiled code. To do this, use

   C-u M-x org-reload <RET>
   

   or, from the menu: Org → Refresh/Reload → Reload Org uncompiled.

2. Then, activate the debugger:

   M-x toggle-debug-on-error <RET>
   

   or, from the menu: Options → Enter Debugger on Error.

3. Do whatever you have to do to hit the error. Do not forget to document the steps you take.
4. When you hit the error, a ‘*Backtrace*’ buffer appears on the screen. Save this buffer to a file—for example using C-x C-w—and attach it to your bug report.

1.5 Typesetting Conventions Used in this Manual ¶

TODO keywords, tags, properties, etc. ¶

Org uses various syntactical elements: TODO keywords, tags, property names, keywords, blocks, etc. In this manual we use the following conventions:

‘TODO’

‘WAITING’

TODO keywords are written with all capitals, even if they are user-defined.

‘boss’

‘ARCHIVE’

Tags are case-sensitive. User-defined tags are usually written in lowercase; built-in tags with special meaning are written as they should appear in the document, usually with all capitals.

‘Release’

‘PRIORITY’

User-defined properties are capitalized; built-in properties with special meaning are written with all capitals.

‘TITLE’

‘BEGIN’ … ‘END’

Keywords and blocks are written in uppercase to enhance their readability, but you can use lowercase in your Org files.

Key bindings and commands ¶

The manual lists both the keys and the corresponding commands for accessing a functionality. Org mode often uses the same key for different functions, depending on context. The command that is bound to such keys has a generic name, like org-metaright. In the manual we will, wherever possible, give the function that is internally called by the generic command. For example, in the chapter on document structure, M-RIGHT will be listed to call org-do-demote, while in the chapter on tables, it will be listed to call org-table-move-column-right.

2.1 Headlines ¶

Headlines define the structure of an outline tree. Org headlines start on the left margin³ with one or more stars followed by a space. For example:

* Top level headline
** Second level
*** Third level
    some text
*** Third level
    more text
* Another top level headline

The name defined in org-footnote-section is reserved. Do not use it as a title for your own headings.

Some people find the many stars too noisy and would prefer an outline that has whitespace followed by a single star as headline starters. This can be achieved using a Org Indent minor mode. See A Cleaner Outline View for more information.

Headlines are not numbered. However, you may want to dynamically number some, or all, of them. See Dynamic Headline Numbering.

An empty line after the end of a subtree is considered part of it and is hidden when the subtree is folded. However, if you leave at least two empty lines, one empty line remains visible after folding the subtree, in order to structure the collapsed view. See the variable org-cycle-separator-lines to modify this behavior.

2.2 Visibility Cycling ¶

• Global and local cycling
• Initial visibility
• Catching invisible edits

#+STARTUP: overview
#+STARTUP: content
#+STARTUP: showall
#+STARTUP: show2levels
#+STARTUP: show3levels
#+STARTUP: show4levels
#+STARTUP: show5levels
#+STARTUP: showeverything

2.3 Motion ¶

The following commands jump to other headlines in the buffer.

C-c C-n (org-next-visible-heading) ¶

Next heading.

C-c C-p (org-previous-visible-heading) ¶

Previous heading.

C-c C-f (org-forward-heading-same-level) ¶

Next heading same level.

C-c C-b (org-backward-heading-same-level) ¶

Previous heading same level.

C-c C-u (outline-up-heading) ¶

Backward to higher level heading.

C-c C-j (org-goto) ¶

Jump to a different place without changing the current outline visibility. Shows the document structure in a temporary buffer, where you can use the following keys to find your destination:

TAB	Cycle visibility.
DOWN / UP	Next/previous visible headline.
RET	Select this location.
/	Do a Sparse-tree search

The following keys work if you turn off org-goto-auto-isearch

n / p	Next/previous visible headline.
f / b	Next/previous headline same level.
u	One level up.
0 … 9	Digit argument.
q	Quit.

See also the variable org-goto-interface.

2.4 Structure Editing ¶

M-RET (org-meta-return) ¶

Insert a new heading, item or row.

If the command is used at the beginning of a line, and if there is a heading or a plain list item (see Plain Lists) at point, the new heading/item is created before the current line. When used at the beginning of a regular line of text, turn that line into a heading.

When this command is used in the middle of a line, the line is split and the rest of the line becomes the new item or headline. If you do not want the line to be split, customize org-M-RET-may-split-line.

Calling the command with a C-u prefix unconditionally inserts a new heading at the end of the current subtree, thus preserving its contents. With a double C-u C-u prefix, the new heading is created at the end of the parent subtree instead.

C-RET (org-insert-heading-respect-content) ¶

Insert a new heading at the end of the current subtree.

M-S-RET (org-insert-todo-heading) ¶

Insert new TODO entry with same level as current heading. See also the variable org-treat-insert-todo-heading-as-state-change.

C-S-RET (org-insert-todo-heading-respect-content) ¶

Insert new TODO entry with same level as current heading. Like C-RET, the new headline is inserted after the current subtree.

TAB (org-cycle) ¶

In a new entry with no text yet, the first TAB demotes the entry to become a child of the previous one. The next TAB makes it a parent, and so on, all the way to top level. Yet another TAB, and you are back to the initial level.

M-LEFT (org-do-promote) ¶

M-RIGHT (org-do-demote)

Promote or demote current heading by one level.

When there is an active region—i.e., when Transient Mark mode is active—promotion and demotion work on all headlines in the region. To select a region of headlines, it is best to place both point and mark at the beginning of a line, mark at the beginning of the first headline, and point at the line just after the last headline to change.

M-S-LEFT (org-promote-subtree) ¶

Promote the current subtree by one level.

M-S-RIGHT (org-demote-subtree) ¶

Demote the current subtree by one level.

M-UP (org-move-subtree-up) ¶

Move subtree up, i.e., swap with previous subtree of same level.

M-DOWN (org-move-subtree-down) ¶

Move subtree down, i.e., swap with next subtree of same level.

C-c @ (org-mark-subtree) ¶

Mark the subtree at point. Hitting repeatedly marks subsequent subtrees of the same level as the marked subtree.

C-c C-x C-w (org-cut-subtree) ¶

Kill subtree, i.e., remove it from buffer but save in kill ring. With a numeric prefix argument N, kill N sequential subtrees.

C-c C-x M-w (org-copy-subtree) ¶

Copy subtree to kill ring. With a numeric prefix argument N, copy the N sequential subtrees.

C-c C-x C-y (org-paste-subtree) ¶

Yank subtree from kill ring. This does modify the level of the subtree to make sure the tree fits in nicely at the yank position. The yank level can also be specified with a numeric prefix argument, or by yanking after a headline marker like ‘****’.

C-y (org-yank) ¶

Depending on the variables org-yank-adjusted-subtrees and org-yank-folded-subtrees, Org’s internal yank command pastes subtrees folded and in a clever way, using the same command as C-c C-x C-y. With the default settings, no level adjustment takes place, but the yanked tree is folded unless doing so would swallow text previously visible. Any prefix argument to this command forces a normal yank to be executed, with the prefix passed along. A good way to force a normal yank is C-u C-y. If you use yank-pop after a yank, it yanks previous kill items plainly, without adjustment and folding.

C-c C-x c (org-clone-subtree-with-time-shift) ¶

Clone a subtree by making a number of sibling copies of it. You are prompted for the number of copies to make, and you can also specify if any timestamps in the entry should be shifted. This can be useful, for example, to create a number of tasks related to a series of lectures to prepare. For more details, see the docstring of the command org-clone-subtree-with-time-shift.

C-c C-w (org-refile) ¶

Refile entry or region to a different location. See Refile and Copy.

C-c ^ (org-sort) ¶

Sort same-level entries. When there is an active region, all entries in the region are sorted. Otherwise the children of the current headline are sorted. The command prompts for the sorting method, which can be alphabetically, numerically, by time—first timestamp with active preferred, creation time, scheduled time, deadline time—by priority, by TODO keyword—in the sequence the keywords have been defined in the setup—or by the value of a property. Reverse sorting is possible as well. You can also supply your own function to extract the sorting key. With a C-u prefix, sorting is case-sensitive.

C-x n s (org-narrow-to-subtree) ¶

Narrow buffer to current subtree.

C-x n b (org-narrow-to-block) ¶

Narrow buffer to current block.

C-x n w (widen) ¶

Widen buffer to remove narrowing.

C-c * (org-toggle-heading) ¶

Turn a normal line or plain list item into a headline—so that it becomes a subheading at its location. Also turn a headline into a normal line by removing the stars. If there is an active region, turn all lines in the region into headlines. If the first line in the region was an item, turn only the item lines into headlines. Finally, if the first line is a headline, remove the stars from all headlines in the region.

Note that when point is inside a table (see Tables), the Meta-Cursor keys have different functionality.

2.5 Sparse Trees ¶

An important feature of Org mode is the ability to construct sparse trees for selected information in an outline tree, so that the entire document is folded as much as possible, but the selected information is made visible along with the headline structure above it⁷. Just try it out and you will see immediately how it works.

Org mode contains several commands creating such trees, all these commands can be accessed through a dispatcher:

C-c / (org-sparse-tree) ¶

This prompts for an extra key to select a sparse-tree creating command.

C-c / r or C-c / / (org-occur) ¶

Prompts for a regexp (see Regular Expressions) and shows a sparse tree with all matches. If the match is in a headline, the headline is made visible. If the match is in the body of an entry, headline and body are made visible. In order to provide minimal context, also the full hierarchy of headlines above the match is shown, as well as the headline following the match. Each match is also highlighted; the highlights disappear when the buffer is changed by an editing command, or by pressing C-c C-c⁸. When called with a C-u prefix argument, previous highlights are kept, so several calls to this command can be stacked.

M-g n or M-g M-n (next-error) ¶

Jump to the next sparse tree match in this buffer.

M-g p or M-g M-p (previous-error) ¶

Jump to the previous sparse tree match in this buffer.

For frequently used sparse trees of specific search strings, you can use the variable org-agenda-custom-commands to define fast keyboard access to specific sparse trees. These commands will then be accessible through the agenda dispatcher (see The Agenda Dispatcher). For example:

(setq org-agenda-custom-commands
      '(("f" occur-tree "FIXME")))

defines the key f as a shortcut for creating a sparse tree matching the string ‘FIXME’.

The other sparse tree commands select headings based on TODO keywords, tags, or properties and are discussed later in this manual.

To print a sparse tree, you can use the Emacs command ps-print-buffer-with-faces which does not print invisible parts of the document. Or you can use the command C-c C-e C-v to export only the visible part of the document and print the resulting file.

2.6 Plain Lists ¶

Within an entry of the outline tree, hand-formatted lists can provide additional structure. They also provide a way to create lists of checkboxes (see Checkboxes). Org supports editing such lists, and every exporter (see Exporting) can parse and format them.

Org knows ordered lists, unordered lists, and description lists.

• Unordered list items start with ‘-’, ‘+’, or ‘*’⁹ as bullets.
• Ordered list items start with a numeral followed by either a period or a right parenthesis¹⁰, such as ‘1.’ or ‘1)’¹¹ If you want a list to start with a different value—e.g., 20—start the text of the item with ‘[@20]’¹². Those constructs can be used in any item of the list in order to enforce a particular numbering.
• Description list items are unordered list items, and contain the separator ‘::’ to distinguish the description term from the description.

Items belonging to the same list must have the same indentation on the first line. In particular, if an ordered list reaches number ‘10.’, then the 2-digit numbers must be written left-aligned with the other numbers in the list. An item ends before the next line that is less or equally indented than its bullet/number.

A list ends whenever every item has ended, which means before any line less or equally indented than items at top level. It also ends before two blank lines. In that case, all items are closed. Here is an example:

* Lord of the Rings
My favorite scenes are (in this order)
1. The attack of the Rohirrim
2. Eowyn's fight with the witch king
   + this was already my favorite scene in the book
   + I really like Miranda Otto.
3. Peter Jackson being shot by Legolas
   - on DVD only
   He makes a really funny face when it happens.
But in the end, no individual scenes matter but the film as a whole.
Important actors in this film are:
- Elijah Wood :: He plays Frodo
- Sean Astin :: He plays Sam, Frodo's friend.  I still remember him
     very well from his role as Mikey Walsh in /The Goonies/.

Org supports these lists by tuning filling and wrapping commands to deal with them correctly, and by exporting them properly (see Exporting). Since indentation is what governs the structure of these lists, many structural constructs like ‘#+BEGIN_’ blocks can be indented to signal that they belong to a particular item.

If you find that using a different bullet for a sub-list—than that used for the current list-level—improves readability, customize the variable org-list-demote-modify-bullet. To get a greater difference of indentation between items and theirs sub-items, customize org-list-indent-offset.

The following commands act on items when point is in the first line of an item—the line with the bullet or number. Some of them imply the application of automatic rules to keep list structure intact. If some of these actions get in your way, configure org-list-automatic-rules to disable them individually.

TAB (org-cycle) ¶

Items can be folded just like headline levels. Normally this works only if point is on a plain list item. For more details, see the variable org-cycle-include-plain-lists. If this variable is set to integrate, plain list items are treated like low-level headlines. The level of an item is then given by the indentation of the bullet/number. Items are always subordinate to real headlines, however; the hierarchies remain completely separated. In a new item with no text yet, the first TAB demotes the item to become a child of the previous one. Subsequent TABs move the item to meaningful levels in the list and eventually get it back to its initial position.

M-RET (org-insert-heading) ¶

Insert new item at current level. With a prefix argument, force a new heading (see Structure Editing). If this command is used in the middle of an item, that item is split in two, and the second part becomes the new item¹³. If this command is executed before item’s body, the new item is created before the current one.

M-S-RET ¶

Insert a new item with a checkbox (see Checkboxes).

S-UP ¶

S-DOWN

Jump to the previous/next item in the current list, but only if org-support-shift-select is off¹⁴. If not, you can still use paragraph jumping commands like C-UP and C-DOWN to quite similar effect.

M-UP ¶

M-DOWN

Move the item including subitems up/down¹⁵, i.e., swap with previous/next item of same indentation. If the list is ordered, renumbering is automatic.

M-LEFT ¶

M-RIGHT

Decrease/increase the indentation of an item, leaving children alone.

M-S-LEFT ¶

M-S-RIGHT

Decrease/increase the indentation of the item, including subitems. Initially, the item tree is selected based on current indentation. When these commands are executed several times in direct succession, the initially selected region is used, even if the new indentation would imply a different hierarchy. To use the new hierarchy, break the command chain by moving point.

As a special case, using this command on the very first item of a list moves the whole list. This behavior can be disabled by configuring org-list-automatic-rules. The global indentation of a list has no influence on the text after the list.

C-c C-c ¶

If there is a checkbox (see Checkboxes) in the item line, toggle the state of the checkbox. In any case, verify bullets and indentation consistency in the whole list.

C-c - ¶

Cycle the entire list level through the different itemize/enumerate bullets (‘-’, ‘+’, ‘*’, ‘1.’, ‘1)’) or a subset of them, depending on org-plain-list-ordered-item-terminator, the type of list, and its indentation. With a numeric prefix argument N, select the Nth bullet from this list. If there is an active region when calling this, all lines are converted to list items. With a prefix argument, the selected text is changed into a single item. If the first line already was a list item, any item marker is removed from the list. Finally, even without an active region, a normal line is converted into a list item.

C-c * ¶

Turn a plain list item into a headline—so that it becomes a subheading at its location. See Structure Editing, for a detailed explanation.

C-c C-* ¶

Turn the whole plain list into a subtree of the current heading. Checkboxes (see Checkboxes) become ‘TODO’, respectively ‘DONE’, keywords when unchecked, respectively checked.

S-LEFT ¶

S-RIGHT

This command also cycles bullet styles when point is in on the bullet or anywhere in an item line, details depending on org-support-shift-select.

C-c ^ ¶

Sort the plain list. Prompt for the sorting method: numerically, alphabetically, by time, or by custom function.

2.7 Drawers ¶

Sometimes you want to keep information associated with an entry, but you normally do not want to see it. For this, Org mode has drawers. They can contain anything but a headline and another drawer. Drawers look like this:

** This is a headline
Still outside the drawer
:DRAWERNAME:
This is inside the drawer.
:END:
After the drawer.

You can interactively insert a drawer at point by calling org-insert-drawer, which is bound to C-c C-x d. With an active region, this command puts the region inside the drawer. With a prefix argument, this command calls non-interactive function org-insert-property-drawer, which creates a ‘PROPERTIES’ drawer right below the current headline. Org mode uses this special drawer for storing properties (see Properties and Columns). You cannot use it for anything else.

Completion over drawer keywords is also possible using M-TAB¹⁶.

Visibility cycling (see Visibility Cycling) on the headline hides and shows the entry, but keep the drawer collapsed to a single line. In order to look inside the drawer, you need to move point to the drawer line and press TAB there.

You can also arrange for state change notes (see Tracking TODO state changes) and clock times (see Clocking Work Time) to be stored in a ‘LOGBOOK’ drawer. If you want to store a quick note there, in a similar way to state changes, use

C-c C-z ¶

Add a time-stamped note to the ‘LOGBOOK’ drawer.

2.8 Blocks ¶

Org mode uses ‘#+BEGIN’ … ‘#+END’ blocks for various purposes from including source code examples (see Literal Examples) to capturing time logging information (see Clocking Work Time). These blocks can be folded and unfolded by pressing TAB in the ‘#+BEGIN’ line. You can also get all blocks folded at startup by configuring the variable org-hide-block-startup or on a per-file basis by using

#+STARTUP: hideblocks
#+STARTUP: nohideblocks

3.1 Built-in Table Editor ¶

Org makes it easy to format tables in plain ASCII. Any line with ‘|’ as the first non-whitespace character is considered part of a table. ‘|’ is also the column separator¹⁷. Moreover, a line starting with ‘|-’ is a horizontal rule. It separates rows explicitly. Rows before the first horizontal rule are header lines. A table might look like this:

| Name  | Phone | Age |
|-------+-------+-----|
| Peter |  1234 |  17 |
| Anna  |  4321 |  25 |

A table is re-aligned automatically each time you press TAB, RET or C-c C-c inside the table. TAB also moves to the next field—RET to the next row—and creates new table rows at the end of the table or before horizontal lines. The indentation of the table is set by the first line. Horizontal rules are automatically expanded on every re-align to span the whole table width. So, to create the above table, you would only type

|Name|Phone|Age|
|-

and then press TAB to align the table and start filling in fields. Even faster would be to type ‘|Name|Phone|Age’ followed by C-c RET.

When typing text into a field, Org treats DEL, Backspace, and all character keys in a special way, so that inserting and deleting avoids shifting other fields. Also, when typing immediately after point was moved into a new field with TAB, S-TAB or RET, the field is automatically made blank. If this behavior is too unpredictable for you, configure the option org-table-auto-blank-field.

Creation and conversion ¶

C-c | (org-table-create-or-convert-from-region) ¶

Convert the active region to table. If every line contains at least one TAB character, the function assumes that the material is tab separated. If every line contains a comma, comma-separated values (CSV) are assumed. If not, lines are split at whitespace into fields. You can use a prefix argument to force a specific separator: C-u forces CSV, C-u C-u forces TAB, C-u C-u C-u prompts for a regular expression to match the separator, and a numeric argument N indicates that at least N consecutive spaces, or alternatively a TAB will be the separator.

If there is no active region, this command creates an empty Org table. But it is easier just to start typing, like | N a m e | P h o n e | A g e RET | - TAB.

Re-aligning and field motion ¶

C-c C-c (org-table-align) ¶

Re-align the table without moving point.

TAB (org-table-next-field) ¶

Re-align the table, move to the next field. Creates a new row if necessary.

M-x org-table-blank-field ¶

Blank the current table field or active region.

S-TAB (org-table-previous-field) ¶

Re-align, move to previous field.

RET (org-table-next-row) ¶

Re-align the table and move down to next row. Creates a new row if necessary. At the beginning or end of a line, RET still inserts a new line, so it can be used to split a table.

M-a (org-table-beginning-of-field) ¶

Move to beginning of the current table field, or on to the previous field.

M-e (org-table-end-of-field) ¶

Move to end of the current table field, or on to the next field.

Column and row editing ¶

M-LEFT (org-table-move-column-left) ¶

Move the current column left.

M-RIGHT (org-table-move-column-right) ¶

Move the current column right.

M-S-LEFT (org-table-delete-column) ¶

Kill the current column.

M-S-RIGHT (org-table-insert-column) ¶

Insert a new column at point position. Move the recent column and all cells to the right of this column to the right.

M-UP (org-table-move-row-up) ¶

Move the current row up.

M-DOWN (org-table-move-row-down) ¶

Move the current row down.

M-S-UP (org-table-kill-row) ¶

Kill the current row or horizontal line.

S-UP (org-table-move-cell-up) ¶

Move cell up by swapping with adjacent cell.

S-DOWN (org-table-move-cell-down) ¶

Move cell down by swapping with adjacent cell.

S-LEFT (org-table-move-cell-left) ¶

Move cell left by swapping with adjacent cell.

S-RIGHT (org-table-move-cell-right) ¶

Move cell right by swapping with adjacent cell.

M-S-DOWN (org-table-insert-row) ¶

Insert a new row above the current row. With a prefix argument, the line is created below the current one.

C-c - (org-table-insert-hline) ¶

Insert a horizontal line below current row. With a prefix argument, the line is created above the current line.

C-c RET (org-table-hline-and-move) ¶

Insert a horizontal line below current row, and move point into the row below that line.

C-c ^ (org-table-sort-lines) ¶

Sort the table lines in the region. The position of point indicates the column to be used for sorting, and the range of lines is the range between the nearest horizontal separator lines, or the entire table. If point is before the first column, you are prompted for the sorting column. If there is an active region, the mark specifies the first line and the sorting column, while point should be in the last line to be included into the sorting. The command prompts for the sorting type, alphabetically, numerically, or by time. You can sort in normal or reverse order. You can also supply your own key extraction and comparison functions. When called with a prefix argument, alphabetic sorting is case-sensitive.

Regions ¶

C-c C-x M-w (org-table-copy-region) ¶

Copy a rectangular region from a table to a special clipboard. Point and mark determine edge fields of the rectangle. If there is no active region, copy just the current field. The process ignores horizontal separator lines.

C-c C-x C-w (org-table-cut-region) ¶

Copy a rectangular region from a table to a special clipboard, and blank all fields in the rectangle. So this is the “cut” operation.

C-c C-x C-y (org-table-paste-rectangle) ¶

Paste a rectangular region into a table. The upper left corner ends up in the current field. All involved fields are overwritten. If the rectangle does not fit into the present table, the table is enlarged as needed. The process ignores horizontal separator lines.

M-RET (org-table-wrap-region) ¶

Split the current field at point position and move the rest to the line below. If there is an active region, and both point and mark are in the same column, the text in the column is wrapped to minimum width for the given number of lines. A numeric prefix argument may be used to change the number of desired lines. If there is no region, but you specify a prefix argument, the current field is made blank, and the content is appended to the field above.

Calculations ¶

C-c + (org-table-sum) ¶

Sum the numbers in the current column, or in the rectangle defined by the active region. The result is shown in the echo area and can be inserted with C-y.

S-RET (org-table-copy-down) ¶

When current field is empty, copy from first non-empty field above. When not empty, copy current field down to next row and move point along with it.

Depending on the variable org-table-copy-increment, integer and time stamp field values, and fields prefixed or suffixed with a whole number, can be incremented during copy. Also, a 0 prefix argument temporarily disables the increment.

This key is also used by shift-selection and related modes (see Packages that conflict with Org mode).

Miscellaneous ¶

C-c ` (org-table-edit-field) ¶

Edit the current field in a separate window. This is useful for fields that are not fully visible (see Column Width and Alignment). When called with a C-u prefix, just make the full field visible, so that it can be edited in place. When called with two C-u prefixes, make the editor window follow point through the table and always show the current field. The follow mode exits automatically when point leaves the table, or when you repeat this command with C-u C-u C-c `.

M-x org-table-import ¶

Import a file as a table. The table should be TAB or whitespace separated. Use, for example, to import a spreadsheet table or data from a database, because these programs generally can write TAB-separated text files. This command works by inserting the file into the buffer and then converting the region to a table. Any prefix argument is passed on to the converter, which uses it to determine the separator.

C-c | (org-table-create-or-convert-from-region) ¶

Tables can also be imported by pasting tabular text into the Org buffer, selecting the pasted text with C-x C-x and then using the C-c | command (see Creation and conversion).

M-x org-table-export ¶

Export the table, by default as a TAB-separated file. Use for data exchange with, for example, spreadsheet or database programs. The format used to export the file can be configured in the variable org-table-export-default-format. You may also use properties ‘TABLE_EXPORT_FILE’ and ‘TABLE_EXPORT_FORMAT’ to specify the file name and the format for table export in a subtree. Org supports quite general formats for exported tables. The exporter format is the same as the format used by Orgtbl radio tables, see Translator functions, for a detailed description.

M-x org-table-header-line-mode ¶

Turn on the display of the first data row of the table at point in the window header line when this first row is not visible anymore in the buffer. You can activate this minor mode by default by setting the option org-table-header-line-p to t.

M-x org-table-transpose-table-at-point ¶

Transpose the table at point and eliminate hlines.

3.2 Column Width and Alignment ¶

The width of columns is automatically determined by the table editor. The alignment of a column is determined automatically from the fraction of number-like versus non-number fields in the column.

Editing a field may modify alignment of the table. Moving a contiguous row or column—i.e., using TAB or RET—automatically re-aligns it. If you want to disable this behavior, set org-table-automatic-realign to nil. In any case, you can always align manually a table:

C-c C-c (org-table-align) ¶

Align the current table.

Setting the option org-startup-align-all-tables re-aligns all tables in a file upon visiting it. You can also set this option on a per-file basis with:

#+STARTUP: align
#+STARTUP: noalign

Sometimes a single field or a few fields need to carry more text, leading to inconveniently wide columns. Maybe you want to hide away several columns or display them with a fixed width, regardless of content, as shown in the following example.

|---+---------------------+--------|           |---+-------…+…|
|   | <6>                 |        |           |   | <6>   …|…|
| 1 | one                 | some   |   ----\   | 1 | one   …|…|
| 2 | two                 | boring |   ----/   | 2 | two   …|…|
| 3 | This is a long text | column |           | 3 | This i…|…|
|---+---------------------+--------|           |---+-------…+…|

To set the width of a column, one field anywhere in the column may contain just the string ‘<N>’ where N specifies the width as a number of characters. You control displayed width of columns with the following tools:

C-c TAB (org-table-toggle-column-width) ¶

Shrink or expand current column.

If a width cookie specifies a width W for the column, shrinking it displays the first W visible characters only. Otherwise, the column is shrunk to a single character.

When called before the first column or after the last one, ask for a list of column ranges to operate on.

C-u C-c TAB (org-table-shrink) ¶

Shrink all columns with a column width. Expand the others.

C-u C-u C-c TAB (org-table-expand) ¶

Expand all columns.

To see the full text of a shrunk field, hold the mouse over it: a tool-tip window then shows the full contents of the field. Alternatively, C-h . (display-local-help) reveals them, too. For convenience, any change near the shrunk part of a column expands it.

Setting the option org-startup-shrink-all-tables shrinks all columns containing a width cookie in a file the moment it is visited. You can also set this option on a per-file basis with:

#+STARTUP: shrink

If you would like to overrule the automatic alignment of number-rich columns to the right and of string-rich columns to the left, you can use ‘<r>’, ‘<c>’ or ‘<l>’ in a similar fashion. You may also combine alignment and field width like this: ‘<r10>’.

Lines which only contain these formatting cookies are removed automatically upon exporting the document.

3.3 Column Groups ¶

When Org exports tables, it does so by default without vertical lines because that is visually more satisfying in general. Occasionally however, vertical lines can be useful to structure a table into groups of columns, much like horizontal lines can do for groups of rows. In order to specify column groups, you can use a special row where the first field contains only ‘/’. The further fields can either contain ‘<’ to indicate that this column should start a group, ‘>’ to indicate the end of a column, or ‘<>’ (no space between ‘<’ and ‘>’) to make a column a group of its own. Upon export, boundaries between column groups are marked with vertical lines. Here is an example:

| N | N^2 | N^3 | N^4 | sqrt(n) | sqrt[4](N) |
|---+-----+-----+-----+---------+------------|
| / |  <  |     |  >  |       < |          > |
| 1 |  1  |  1  |  1  |       1 |          1 |
| 2 |  4  |  8  | 16  |  1.4142 |     1.1892 |
| 3 |  9  | 27  | 81  |  1.7321 |     1.3161 |
|---+-----+-----+-----+---------+------------|
#+TBLFM: $2=$1^2::$3=$1^3::$4=$1^4::$5=sqrt($1)::$6=sqrt(sqrt(($1)))

It is also sufficient to just insert the column group starters after every vertical line you would like to have:

| N | N^2 | N^3 | N^4 | sqrt(n) | sqrt[4](N) |
|---+-----+-----+-----+---------+------------|
| / | <   |     |     | <       |            |

3.4 The Orgtbl Minor Mode ¶

If you like the intuitive way the Org table editor works, you might also want to use it in other modes like Text mode or Mail mode. The minor mode Orgtbl mode makes this possible. You can always toggle the mode with M-x orgtbl-mode. To turn it on by default, for example in Message mode, use

(add-hook 'message-mode-hook #'turn-on-orgtbl)

Furthermore, with some special setup, it is possible to maintain tables in arbitrary syntax with Orgtbl mode. For example, it is possible to construct LaTeX tables with the underlying ease and power of Orgtbl mode, including spreadsheet capabilities. For details, see Tables in Arbitrary Syntax.

3.5 The Spreadsheet ¶

The table editor makes use of the Emacs Calc package to implement spreadsheet-like capabilities. It can also evaluate Emacs Lisp forms to derive fields from other fields. While fully featured, Org’s implementation is not identical to other spreadsheets. For example, Org knows the concept of a column formula that will be applied to all non-header fields in a column without having to copy the formula to each relevant field. There is also a formula debugger, and a formula editor with features for highlighting fields in the table corresponding to the references at point in the formula, moving these references by arrow keys.

• References
• Formula syntax for Calc
• Emacs Lisp forms as formulas
• Durations and time values
• Field and range formulas
• Column formulas
• Lookup functions
• Editing and debugging formulas
• Updating the table
• Advanced features

@ROW$COLUMN

#+CONSTANTS: c=299792458. pi=3.14 eps=2.4e-6

remote(NAME,REF)

'(concat $1 $2)

'(+ $1 $2);N

'(apply '+ '($1..$4));N

'(substring "$1" $2 $3);L

'(substring $1 (string-to-number $2) (string-to-number $3))

|  Task 1 |   Task 2 |    Total |
|---------+----------+----------|
|    2:12 |     1:47 | 03:59:00 |
|    2:12 |     1:47 |    03:59 |
| 3:02:20 | -2:07:00 |     0.92 |
#+TBLFM: @2$3=$1+$2;T::@3$3=$1+$2;U::@4$3=$1+$2;t

| x | y |
|---+---|
| 1 |   |
| 2 |   |
#+TBLFM: $2=$1*1
#+TBLFM: $2=$1*2

| x | y |
|---+---|
| 1 | 2 |
| 2 | 4 |
#+TBLFM: $2=$1*1
#+TBLFM: $2=$1*2

| x | y |
|---+---|
| 1 | 1 |
| 2 | 2 |
#+TBLFM: $2=$1*1
#+TBLFM: $2=$1*2

|---+---------+--------+--------+--------+-------+------|
|   | Student | Prob 1 | Prob 2 | Prob 3 | Total | Note |
|---+---------+--------+--------+--------+-------+------|
| ! |         |     P1 |     P2 |     P3 |   Tot |      |
| # | Maximum |     10 |     15 |     25 |    50 | 10.0 |
| ^ |         |     m1 |     m2 |     m3 |    mt |      |
|---+---------+--------+--------+--------+-------+------|
| # | Peter   |     10 |      8 |     23 |    41 |  8.2 |
| # | Sam     |      2 |      4 |      3 |     9 |  1.8 |
|---+---------+--------+--------+--------+-------+------|
|   | Average |        |        |        |  25.0 |      |
| ^ |         |        |        |        |    at |      |
| $ | max=50  |        |        |        |       |      |
|---+---------+--------+--------+--------+-------+------|
#+TBLFM: $6=vsum($P1..$P3)::$7=10*$Tot/$max;%.1f::$at=vmean(@-II..@-I);%.1f

|---+-------------+---+-----+--------------------------------------|
|   | Func        | n | x   | Result                               |
|---+-------------+---+-----+--------------------------------------|
| # | exp(x)      | 1 | x   | 1 + x                                |
| # | exp(x)      | 2 | x   | 1 + x + x^2 / 2                      |
| # | exp(x)      | 3 | x   | 1 + x + x^2 / 2 + x^3 / 6            |
| # | x^2+sqrt(x) | 2 | x=0 | x*(0.5 / 0) + x^2 (2 - 0.25 / 0) / 2 |
| # | x^2+sqrt(x) | 2 | x=1 | 2 + 2.5 x - 2.5 + 0.875 (x - 1)^2    |
| * | tan(x)      | 3 | x   | 0.0175 x + 1.77e-6 x^3               |
|---+-------------+---+-----+--------------------------------------|
#+TBLFM: $5=taylor($2,$4,$3);n3

3.6 Org Plot ¶

Org Plot can produce graphs of information stored in Org tables, either graphically or in ASCII art.

Graphical plots using Gnuplot ¶

Org Plot can produce 2D and 3D graphs of information stored in Org tables using Gnuplot and Gnuplot mode. To see this in action, ensure that you have both Gnuplot and Gnuplot mode installed on your system, then call C-c " g or M-x org-plot/gnuplot on the following table.

#+PLOT: title:"Citas" ind:1 deps:(3) type:2d with:histograms set:"yrange [0:]"
| Sede      | Max cites | H-index |
|-----------+-----------+---------|
| Chile     |    257.72 |   21.39 |
| Leeds     |    165.77 |   19.68 |
| Sao Paolo |     71.00 |   11.50 |
| Stockholm |    134.19 |   14.33 |
| Morelia   |    257.56 |   17.67 |

Org Plot supports a range of plot types, and provides the ability to add more. For example, a radar plot can be generated like so:

#+PLOT: title:"An evaluation of plaintext document formats" transpose:yes type:radar min:0 max:4
| Format            | Fine-grained-control | Initial Effort | Syntax simplicity | Editor Support | Integrations | Ease-of-referencing | Versatility |
|-------------------+----------------------+----------------+-------------------+----------------+--------------+---------------------+-------------|
| Word              |                    2 |              4 |                 4 |              2 |            3 |                   2 |           2 |
| LaTeX             |                    4 |              1 |                 1 |              3 |            2 |                   4 |           3 |
| Org Mode          |                    4 |              2 |               3.5 |              1 |            4 |                   4 |           4 |
| Markdown          |                    1 |              3 |                 3 |              4 |            3 |                   3 |           1 |
| Markdown + Pandoc |                  2.5 |            2.5 |               2.5 |              3 |            3 |                   3 |           2 |

Notice that Org Plot is smart enough to apply the table’s headers as labels. Further control over the labels, type, content, and appearance of plots can be exercised through the ‘PLOT’ keyword preceding a table. See below for a complete list of Org Plot options. For more information and examples see the Org Plot tutorial.

Plot options ¶

‘set’

Specify any Gnuplot option to be set when graphing.

‘title’

Specify the title of the plot.

‘ind’

Specify which column of the table to use as the ‘x’ axis.

‘deps’

Specify the columns to graph as a Lisp style list, surrounded by parentheses and separated by spaces for example ‘dep:(3 4)’ to graph the third and fourth columns. Defaults to graphing all other columns aside from the ‘ind’ column.

transpose

When ‘y’, ‘yes’, or ‘t’ attempt to transpose the table data before plotting. Also recognizes the shorthand option ‘trans’.

‘type’

Specify the type of the plot, by default one of ‘2d’, ‘3d’, ‘radar’, or ‘grid’. Available types can be customized with org-plot/preset-plot-types.

‘with’

Specify a ‘with’ option to be inserted for every column being plotted, e.g., ‘lines’, ‘points’, ‘boxes’, ‘impulses’. Defaults to ‘lines’.

‘file’

If you want to plot to a file, specify ‘"path/to/desired/output-file"’.

‘labels’

List of labels to be used for the ‘deps’. Defaults to the column headers if they exist.

‘line’

Specify an entire line to be inserted in the Gnuplot script.

‘map’

When plotting ‘3d’ or ‘grid’ types, set this to ‘t’ to graph a flat mapping rather than a ‘3d’ slope.

min

Provides a minimum axis value that may be used by a plot type. Implicitly assumes the ‘y’ axis is being referred to. Can explicitly provide a value for a either the ‘x’ or ‘y’ axis with ‘xmin’ and ‘ymin’.

max

Provides a maximum axis value that may be used by a plot type. Implicitly assumes the ‘y’ axis is being referred to. Can explicitly provide a value for a either the ‘x’ or ‘y’ axis with ‘xmax’ and ‘ymax’.

ticks

Provides a desired number of axis ticks to display, that may be used by a plot type. If none is given a plot type that requires ticks will use org--plot/sensible-tick-num to try to determine a good value.

‘timefmt’

Specify format of Org mode timestamps as they will be parsed by Gnuplot. Defaults to ‘%Y-%m-%d-%H:%M:%S’.

‘script’

If you want total control, you can specify a script file—place the file name between double-quotes—which will be used to plot. Before plotting, every instance of ‘$datafile’ in the specified script will be replaced with the path to the generated data file. Note: even if you set this option, you may still want to specify the plot type, as that can impact the content of the data file.

ASCII bar plots ¶

While point is on a column, typing C-c `` a or M-x orgtbl-ascii-plot create a new column containing an ASCII-art bars plot. The plot is implemented through a regular column formula. When the source column changes, the bar plot may be updated by refreshing the table, for example typing C-u C-c *.

| Sede          | Max cites |              |
|---------------+-----------+--------------|
| Chile         |    257.72 | WWWWWWWWWWWW |
| Leeds         |    165.77 | WWWWWWWh     |
| Sao Paolo     |     71.00 | WWW;         |
| Stockholm     |    134.19 | WWWWWW:      |
| Morelia       |    257.56 | WWWWWWWWWWWH |
| Rochefourchat |      0.00 |              |
#+TBLFM: $3='(orgtbl-ascii-draw $2 0.0 257.72 12)

The formula is an Elisp call.

Function: orgtbl-ascii-draw value min max &optional width ¶

Draw an ASCII bar in a table.

VALUE is the value to plot.

MIN is the value displayed as an empty bar. MAX is the value filling all the WIDTH. Sources values outside this range are displayed as ‘too small’ or ‘too large’.

WIDTH is the number of characters of the bar plot. It defaults to ‘12’.

4.1 Link Format ¶

Org recognizes plain URIs, possibly wrapped within angle brackets²³, and activate them as clickable links.

The general link format, however, looks like this:

[[LINK][DESCRIPTION]]

or alternatively

[[LINK]]

Some ‘\’, ‘[’ and ‘]’ characters in the LINK part need to be “escaped”, i.e., preceded by another ‘\’ character. More specifically, the following characters, and only them, must be escaped:

1. all ‘[’ and ‘]’ characters,
2. every ‘\’ character preceding either ‘]’ or ‘[’,
3. every ‘\’ character at the end of the link.

Functions inserting links (see Handling Links) properly escape ambiguous characters. You only need to bother about the rules above when inserting directly, or yanking, a URI within square brackets. When in doubt, you may use the function org-link-escape, which turns a link string into its escaped form.

Once a link in the buffer is complete, with all brackets present, Org changes the display so that ‘DESCRIPTION’ is displayed instead of ‘[[LINK][DESCRIPTION]]’ and ‘LINK’ is displayed instead of ‘[[LINK]]’. Links are highlighted in the org-link face, which, by default, is an underlined face.

You can directly edit the visible part of a link. This can be either the LINK part, if there is no description, or the DESCRIPTION part otherwise. To also edit the invisible LINK part, use C-c C-l with point on the link (see Handling Links).

If you place point at the beginning or just behind the end of the displayed text and press BS, you remove the—invisible—bracket at that location²⁴. This makes the link incomplete and the internals are again displayed as plain text. Inserting the missing bracket hides the link internals again. To show the internal structure of all links, use the menu: Org → Hyperlinks → Literal links.

4.2 Internal Links ¶

A link that does not look like a URL—i.e., does not start with a known scheme or a file name—refers to the current document. You can follow it with C-c C-o when point is on the link, or with a mouse click (see Handling Links).

Org provides several refinements to internal navigation within a document. Most notably, a construct like ‘[[#my-custom-id]]’ specifically targets the entry with the ‘CUSTOM_ID’ property set to ‘my-custom-id’. Also, an internal link looking like ‘[[*Some section]]’ points to a headline with the name ‘Some section’²⁵.

When the link does not belong to any of the cases above, Org looks for a dedicated target: the same string in double angular brackets, like ‘<<My Target>>’.

If no dedicated target exists, the link tries to match the exact name of an element within the buffer. Naming is done, unsurprisingly, with the ‘NAME’ keyword, which has to be put in the line before the element it refers to, as in the following example

#+NAME: My Target
| a  | table      |
|----+------------|
| of | four cells |

Ultimately, if none of the above succeeds, Org searches for a headline that is exactly the link text but may also include a TODO keyword and tags, or initiates a plain text search, according to the value of org-link-search-must-match-exact-headline.

Note that you must make sure custom IDs, dedicated targets, and names are unique throughout the document. Org provides a linter to assist you in the process, if needed. See Org Syntax.

During export, internal links are used to mark objects and assign them a number. Marked objects are then referenced by links pointing to them. In particular, links without a description appear as the number assigned to the marked object²⁶. In the following excerpt from an Org buffer

1. one item
2. <<target>>another item
Here we refer to item [[target]].

The last sentence will appear as ‘Here we refer to item 2’ when exported.

In non-Org files, the search looks for the words in the link text. In the above example the search would be for ‘target’.

Following a link pushes a mark onto Org’s own mark ring. You can return to the previous position with C-c &. Using this command several times in direct succession goes back to positions recorded earlier.

4.3 Radio Targets ¶

Org can automatically turn any occurrences of certain target names in normal text into a link. So without explicitly creating a link, the text connects to the target radioing its position. Radio targets are enclosed by triple angular brackets. For example, a target ‘<<<My Target>>>’ causes each occurrence of ‘my target’ in normal text to become activated as a link. The Org file is scanned automatically for radio targets only when the file is first loaded into Emacs. To update the target list during editing, press C-c C-c with point on or at a target.

4.4 External Links ¶

Org supports links to files, websites, Usenet and email messages, BBDB database entries and links to both IRC conversations and their logs. External links are URL-like locators. They start with a short identifying string followed by a colon. There can be no space after the colon.

Here is the full set of built-in link types:

‘file’

File links. File name may be remote, absolute, or relative.

Additionally, you can specify a line number, or a text search. In Org files, you may link to a headline name, a custom ID, or a code reference instead.

As a special case, “file” prefix may be omitted if the file name is complete, e.g., it starts with ‘./’, or ‘/’.

‘attachment’

Same as file links but for files and folders attached to the current node (see Attachments). Attachment links are intended to behave exactly as file links but for files relative to the attachment directory.

‘bbdb’

Link to a BBDB record, with possible regexp completion.

‘docview’

Link to a document opened with DocView mode. You may specify a page number.

‘doi’

Link to an electronic resource, through its handle.

‘elisp’

Execute an Elisp command upon activation.

‘gnus’, ‘rmail’, ‘mhe’

Link to messages or folders from a given Emacs’ MUA.

‘help’

Display documentation of a symbol in ‘*Help*’ buffer.

‘http’, ‘https’

Web links.

‘id’

Link to a specific headline by its ID property, in an Org file.

‘info’

Link to an Info manual, or to a specific node.

‘irc’

Link to an IRC channel.

‘mailto’

Link to message composition.

‘news’

Usenet links.

‘shell’

Execute a shell command upon activation.

The following table illustrates the link types above, along with their options:

On top of these built-in link types, additional ones are available through the ‘org-contrib’ repository (see Installation). For example, these links to VM or Wanderlust messages are available when you load the corresponding libraries from the ‘org-contrib’ repository:

For information on customizing Org to add new link types, see Adding Hyperlink Types.

A link should be enclosed in double brackets and may contain descriptive text to be displayed instead of the URL (see Link Format), for example:

[[https://www.gnu.org/software/emacs/][GNU Emacs]]

If the description is a file name or URL that points to an image, HTML export (see HTML Export) inlines the image as a clickable button. If there is no description at all and the link points to an image, that image is inlined into the exported HTML file.

Org also recognizes external links amid normal text and activates them as links. If spaces must be part of the link (for example in ‘bbdb:R.*Stallman’), or if you need to remove ambiguities about the end of the link, enclose the link in square or angular brackets.

4.5 Handling Links ¶

Org provides methods to create a link in the correct syntax, to insert it into an Org file, and to follow the link.

The main function is org-store-link, called with M-x org-store-link. Because of its importance, we suggest to bind it to a widely available key (see Activation). It stores a link to the current location. The link is stored for later insertion into an Org buffer—see below. The kind of link that is created depends on the current buffer:

Org mode buffers

For Org files, if there is a ‘<<target>>’ at point, the link points to the target. Otherwise it points to the current headline, which is also the description.

If the headline has a ‘CUSTOM_ID’ property, store a link to this custom ID. In addition or alternatively, depending on the value of org-id-link-to-org-use-id, create and/or use a globally unique ‘ID’ property for the link²⁸. So using this command in Org buffers potentially creates two links: a human-readable link from the custom ID, and one that is globally unique and works even if the entry is moved from file to file. The ‘ID’ property can be either a UUID (default) or a timestamp, depending on org-id-method. Later, when inserting the link, you need to decide which one to use.

Email/News clients: VM, Rmail, Wanderlust, MH-E, Gnus ¶

Pretty much all Emacs mail clients are supported. The link points to the current article, or, in some Gnus buffers, to the group. The description is constructed according to the variable org-link-email-description-format. By default, it refers to the addressee and the subject.

Web browsers: W3M and EWW

Here the link is the current URL, with the page title as the description.

Contacts: BBDB

Links created in a BBDB buffer point to the current entry.

Chat: IRC ¶

For IRC links, if the variable org-irc-link-to-logs is non-nil, create a ‘file’ style link to the relevant point in the logs for the current conversation. Otherwise store an ‘irc’ style link to the user/channel/server under the point.

Other files

For any other file, the link points to the file, with a search string (see Search Options in File Links) pointing to the contents of the current line. If there is an active region, the selected words form the basis of the search string. You can write custom Lisp functions to select the search string and perform the search for particular file types (see Custom Searches).

You can also define dedicated links to other files. See Adding Hyperlink Types.

Agenda view

When point is in an agenda view, the created link points to the entry referenced by the current line.

From an Org buffer, the following commands create, navigate or, more generally, act on links.

C-c C-l (org-insert-link) ¶

Insert a link²⁹. This prompts for a link to be inserted into the buffer. You can just type a link, using text for an internal link, or one of the link type prefixes mentioned in the examples above. The link is inserted into the buffer, along with a descriptive text³⁰. If some text was selected at this time, it becomes the default description.

Inserting stored links

All links stored during the current session are part of the history for this prompt, so you can access them with UP and DOWN (or M-p, M-n).

Completion support

Completion with TAB helps you to insert valid link prefixes like ‘http’ or ‘ftp’, including the prefixes defined through link abbreviations (see Link Abbreviations). If you press RET after inserting only the prefix, Org offers specific completion support for some link types³¹. For example, if you type f i l e RET—alternative access: C-u C-c C-l, see below—Org offers file name completion, and after b b d b RET you can complete contact names.

C-u C-c C-l ¶

When C-c C-l is called with a C-u prefix argument, insert a link to a file. You may use file name completion to select the name of the file. The path to the file is inserted relative to the directory of the current Org file, if the linked file is in the current directory or in a sub-directory of it, or if the path is written relative to the current directory using ‘../’. Otherwise an absolute path is used, if possible with ‘~/’ for your home directory. You can force an absolute path with two C-u prefixes.

C-c C-l (with point on existing link) ¶

When point is on an existing link, C-c C-l allows you to edit the link and description parts of the link.

C-c C-o (org-open-at-point) ¶

Open link at point. This launches a web browser for URL (using browse-url-at-point), run VM/MH-E/Wanderlust/Rmail/Gnus/BBDB for the corresponding links, and execute the command in a shell link. When point is on an internal link, this command runs the corresponding search. When point is on the tags part of a headline, it creates the corresponding tags view (see Matching tags and properties). If point is on a timestamp, it compiles the agenda for that date. Furthermore, it visits text and remote files in ‘file’ links with Emacs and select a suitable application for local non-text files. Classification of files is based on file extension only. See option org-file-apps. If you want to override the default application and visit the file with Emacs, use a C-u prefix. If you want to avoid opening in Emacs, use a C-u C-u prefix.

If point is on a headline, but not on a link, offer all links in the headline and entry text. If you want to setup the frame configuration for following links, customize org-link-frame-setup.

RET ¶

When org-return-follows-link is set, RET also follows the link at point.

mouse-2 or mouse-1 ¶

On links, mouse-1 and mouse-2 opens the link just as C-c C-o does.

mouse-3 ¶

Like mouse-2, but force file links to be opened with Emacs, and internal links to be displayed in another window³².

C-c % (org-mark-ring-push) ¶

Push the current position onto the Org mark ring, to be able to return easily. Commands following an internal link do this automatically.

C-c & (org-mark-ring-goto) ¶

Jump back to a recorded position. A position is recorded by the commands following internal links, and by C-c %. Using this command several times in direct succession moves through a ring of previously recorded positions.

C-c C-x C-n (org-next-link) ¶

C-c C-x C-p (org-previous-link)

Move forward/backward to the next link in the buffer. At the limit of the buffer, the search fails once, and then wraps around. The key bindings for this are really too long; you might want to bind this also to M-n and M-p.

(with-eval-after-load 'org
  (define-key org-mode-map (kbd "M-n") #'org-next-link)
  (define-key org-mode-map (kbd "M-p") #'org-previous-link))

4.6 Using Links Outside Org ¶

You can insert and follow links that have Org syntax not only in Org, but in any Emacs buffer. For this, Org provides two functions: org-insert-link-global and org-open-at-point-global.

You might want to bind them to globally available keys. See Activation for some advice.

4.7 Link Abbreviations ¶

Long URL can be cumbersome to type, and often many similar links are needed in a document. For this you can use link abbreviations. An abbreviated link looks like this

[[linkword:tag][description]]

where the tag is optional. The linkword must be a word, starting with a letter, followed by letters, numbers, ‘-’, and ‘_’. Abbreviations are resolved according to the information in the variable org-link-abbrev-alist that relates the linkwords to replacement text. Here is an example:

(setq org-link-abbrev-alist
      '(("bugzilla"        . "http://10.1.2.9/bugzilla/show_bug.cgi?id=")
        ("Nu Html Checker" . "https://validator.w3.org/nu/?doc=%h")
        ("duckduckgo"      . "https://duckduckgo.com/?q=%s")
        ("omap"            . "https://nominatim.openstreetmap.org/search?q=%s&polygon=1")
        ("ads"             . "https://ui.adsabs.harvard.edu/search/q=%20author%3A\"%s\"")))

If the replacement text contains the string ‘%s’, it is replaced with the tag. Using ‘%h’ instead of ‘%s’ percent-encodes the tag (see the example above, where we need to encode the URL parameter). Using ‘%(my-function)’ passes the tag to a custom Lisp function, and replace it by the resulting string.

If the replacement text do not contain any specifier, it is simply appended to the string in order to create the link.

Instead of a string, you may also specify a Lisp function to create the link. Such a function will be called with the tag as the only argument.

With the above setting, you could link to a specific bug with ‘[[bugzilla:129]]’, search the web for ‘OrgMode’ with ‘[[duckduckgo:OrgMode]]’, show the map location of the Free Software Foundation ‘[[gmap:51 Franklin Street, Boston]]’ or of Carsten office ‘[[omap:Science Park 904, Amsterdam, The Netherlands]]’ and find out what the Org author is doing besides Emacs hacking with ‘[[ads:Dominik,C]]’.

If you need special abbreviations just for a single Org buffer, you can define them in the file with

#+LINK: bugzilla  https://10.1.2.9/bugzilla/show_bug.cgi?id=
#+LINK: duckduckgo https://duckduckgo.com/?q=%s
#+LINK: "Nu Html Checker" https://validator.w3.org/nu/?doc=%h

The abbreviations containing spaces must be quoted.

In-buffer completion (see Completion) can be used after ‘[’ to complete link abbreviations. You may also define a Lisp function that implements special (e.g., completion) support for inserting such a link with C-c C-l. Such a function should not accept any arguments, and should return the full link with a prefix. You can set the link completion function like this:

(org-link-set-parameter "type" :complete #'some-completion-function)

4.8 Search Options in File Links ¶

File links can contain additional information to make Emacs jump to a particular location in the file when following a link. This can be a line number or a search option after a double colon³³. For example, when the command org-store-link creates a link (see Handling Links) to a file, it encodes the words in the current line as a search string that can be used to find this line back later when following the link with C-c C-o.

Note that all search options apply for Attachment links in the same way that they apply for File links.

Here is the syntax of the different ways to attach a search to a file link, together with explanations for each:

[[file:~/code/main.c::255]]
[[file:~/xx.org::My Target]]
[[file:~/xx.org::*My Target]]
[[file:~/xx.org::#my-custom-id]]
[[file:~/xx.org::/regexp/]]
[[attachment:main.c::255]]

‘255’

Jump to line 255.

‘My Target’

Search for a link target ‘<<My Target>>’, or do a text search for ‘my target’, similar to the search in internal links, see Internal Links. In HTML export (see HTML Export), such a file link becomes a HTML reference to the corresponding named anchor in the linked file.

‘*My Target’

In an Org file, restrict search to headlines.

‘#my-custom-id’

Link to a heading with a ‘CUSTOM_ID’ property

‘/REGEXP/’

Do a regular expression search for REGEXP (see Regular Expressions). This uses the Emacs command occur to list all matches in a separate window. If the target file is in Org mode, org-occur is used to create a sparse tree with the matches.

As a degenerate case, a file link with an empty file name can be used to search the current file. For example, ‘[[file:::find me]]’ does a search for ‘find me’ in the current file, just as ‘[[find me]]’ would.

4.9 Custom Searches ¶

The default mechanism for creating search strings and for doing the actual search related to a file link may not work correctly in all cases. For example, BibTeX database files have many entries like year="1993" which would not result in good search strings, because the only unique identification for a BibTeX entry is the citation key.

If you come across such a problem, you can write custom functions to set the right search string for a particular file type, and to do the search for the string in the file. Using add-hook, these functions need to be added to the hook variables org-create-file-search-functions and org-execute-file-search-functions. See the docstring for these variables for more information. Org actually uses this mechanism for BibTeX database files, and you can use the corresponding code as an implementation example. See the file ‘ol-bibtex.el’.

5.1 Basic TODO Functionality ¶

Any headline becomes a TODO item when it starts with the word ‘TODO’, for example:

*** TODO Write letter to Sam Fortune

The most important commands to work with TODO entries are:

C-c C-t (org-todo) ¶

Rotate the TODO state of the current item among

,-> (unmarked) -> TODO -> DONE --.
'--------------------------------'

If TODO keywords have fast access keys (see Fast access to TODO states), prompt for a TODO keyword through the fast selection interface; this is the default behavior when org-use-fast-todo-selection is non-nil.

The same state changing can also be done “remotely” from the agenda buffer with the t command key (see Commands in the Agenda Buffer).

S-RIGHT S-LEFT ¶

Select the following/preceding TODO state, similar to cycling. Useful mostly if more than two TODO states are possible (see Extended Use of TODO Keywords). See also Packages that conflict with Org mode, for a discussion of the interaction with shift-selection. See also the variable org-treat-S-cursor-todo-selection-as-state-change.

C-c / t (org-show-todo-tree) ¶

View TODO items in a sparse tree (see Sparse Trees). Folds the entire buffer, but shows all TODO items—with not-DONE state—and the headings hierarchy above them. With a prefix argument, or by using C-c / T, search for a specific TODO. You are prompted for the keyword, and you can also give a list of keywords like ‘KWD1|KWD2|...’ to list entries that match any one of these keywords. With a numeric prefix argument N, show the tree for the Nth keyword in the variable org-todo-keywords. With two prefix arguments, find all TODO states, both un-done and done.

M-x org-agenda t (org-todo-list) ¶

Show the global TODO list. Collects the TODO items (with not-DONE states) from all agenda files (see Agenda Views) into a single buffer. The new buffer is in Org Agenda mode, which provides commands to examine and manipulate the TODO entries from the new buffer (see Commands in the Agenda Buffer). See The global TODO list, for more information.

S-M-RET (org-insert-todo-heading) ¶

Insert a new TODO entry below the current one.

Changing a TODO state can also trigger tag changes. See the docstring of the option org-todo-state-tags-triggers for details.

5.2 Extended Use of TODO Keywords ¶

By default, marked TODO entries have one of only two states: TODO and DONE. Org mode allows you to classify TODO items in more complex ways with TODO keywords (stored in org-todo-keywords). With special setup, the TODO keyword system can work differently in different files.

Note that tags are another way to classify headlines in general and TODO items in particular (see Tags).

• TODO keywords as workflow states
• TODO keywords as types
• Multiple keyword sets in one file
• Fast access to TODO states
• Setting up keywords for individual files
• Faces for TODO keywords
• TODO dependencies

(setq org-todo-keywords
      '((sequence "TODO" "FEEDBACK" "VERIFY" "|" "DONE" "DELEGATED")))

(setq org-todo-keywords '((type "Fred" "Sara" "Lucy" "|" "DONE")))

(setq org-todo-keywords
      '((sequence "TODO" "|" "DONE")
        (sequence "REPORT" "BUG" "KNOWNCAUSE" "|" "FIXED")
        (sequence "|" "CANCELED")))

(setq org-todo-keywords
      '((sequence "TODO(t)" "|" "DONE(d)")
        (sequence "REPORT(r)" "BUG(b)" "KNOWNCAUSE(k)" "|" "FIXED(f)")
        (sequence "|" "CANCELED(c)")))

#+TODO: TODO FEEDBACK VERIFY | DONE CANCELED

#+TYP_TODO: Fred Sara Lucy Mike | DONE

#+TODO: TODO(t) | DONE(d)
#+TODO: REPORT(r) BUG(b) KNOWNCAUSE(k) | FIXED(f)
#+TODO: | CANCELED(c)

(setq org-todo-keyword-faces
      '(("TODO" . org-warning) ("STARTED" . "yellow")
        ("CANCELED" . (:foreground "blue" :weight bold))))

* TODO Blocked until (two) is done
** DONE one
** TODO two

* Parent
:PROPERTIES:
:ORDERED:  t
:END:
** TODO a
** TODO b, needs to wait for (a)
** TODO c, needs to wait for (a) and (b)

* This entry is never blocked
:PROPERTIES:
:NOBLOCKING: t
:END:

5.3 Progress Logging ¶

To record a timestamp and a note when changing a TODO state, call the command org-todo with a prefix argument.

C-u C-c C-t (org-todo) ¶

Prompt for a note and record a the time of the TODO state change. The note is inserted as a list item below the headline, but can also be placed into a drawer, see Tracking TODO state changes.

If you want to be more systematic, Org mode can automatically record a timestamp and optionally a note when you mark a TODO item as DONE, or even each time you change the state of a TODO item. This system is highly configurable, settings can be on a per-keyword basis and can be localized to a file or even a subtree. For information on how to clock working time for a task, see Clocking Work Time.

• Closing items
• Tracking TODO state changes
• Tracking your habits

(setq org-log-done 'time)

(setq org-log-done 'note)

(setq org-todo-keywords
      '((sequence "TODO(t)" "WAIT(w@/!)" "|" "DONE(d!)" "CANCELED(c@)")))

#+TODO: TODO(t) WAIT(w@/!) | DONE(d!) CANCELED(c@)

* TODO Log each state with only a time
  :PROPERTIES:
  :LOGGING: TODO(!) WAIT(!) DONE(!) CANCELED(!)
  :END:
* TODO Only log when switching to WAIT, and when repeating
  :PROPERTIES:
  :LOGGING: WAIT(@) logrepeat
  :END:
* TODO No logging at all
  :PROPERTIES:
  :LOGGING: nil
  :END:

** TODO Shave
   SCHEDULED: <2009-10-17 Sat .+2d/4d>
   :PROPERTIES:
   :STYLE:    habit
   :LAST_REPEAT: [2009-10-19 Mon 00:36]
   :END:
   - State "DONE"       from "TODO"       [2009-10-15 Thu]
   - State "DONE"       from "TODO"       [2009-10-12 Mon]
   - State "DONE"       from "TODO"       [2009-10-10 Sat]
   - State "DONE"       from "TODO"       [2009-10-04 Sun]
   - State "DONE"       from "TODO"       [2009-10-02 Fri]
   - State "DONE"       from "TODO"       [2009-09-29 Tue]
   - State "DONE"       from "TODO"       [2009-09-25 Fri]
   - State "DONE"       from "TODO"       [2009-09-19 Sat]
   - State "DONE"       from "TODO"       [2009-09-16 Wed]
   - State "DONE"       from "TODO"       [2009-09-12 Sat]

5.4 Priorities ¶

If you use Org mode extensively, you may end up with enough TODO items that it starts to make sense to prioritize them. Prioritizing can be done by placing a priority cookie into the headline of a TODO item right after the TODO keyword, like this:

*** TODO [#A] Write letter to Sam Fortune

By default, Org mode supports three priorities: ‘A’, ‘B’, and ‘C’. ‘A’ is the highest priority. An entry without a cookie is treated as equivalent if it had priority ‘B’. Priorities make a difference only for sorting in the agenda (see Weekly/daily agenda). Outside the agenda, they have no inherent meaning to Org mode. The cookies are displayed with the face defined by the variable org-priority-faces, which can be customized.

You can also use numeric values for priorities, such as

*** TODO [#1] Write letter to Sam Fortune

When using numeric priorities, you need to set org-priority-highest, org-priority-lowest and org-priority-default to integers, which must all be strictly inferior to 65.

Priorities can be attached to any outline node; they do not need to be TODO items.

C-c , (org-priority) ¶

Set the priority of the current headline. The command prompts for a priority character ‘A’, ‘B’ or ‘C’. When you press SPC instead, the priority cookie, if one is set, is removed from the headline. The priorities can also be changed “remotely” from the agenda buffer with the , command (see Commands in the Agenda Buffer).

S-UP (org-priority-up) ¶

S-DOWN (org-priority-down)

Increase/decrease the priority of the current headline⁴⁵. Note that these keys are also used to modify timestamps (see Creating Timestamps). See also Packages that conflict with Org mode, for a discussion of the interaction with shift-selection.

You can change the range of allowed priorities by setting the variables org-priority-highest, org-priority-lowest, and org-priority-default. For an individual buffer, you may set these values (highest, lowest, default) like this (please make sure that the highest priority is earlier in the alphabet than the lowest priority):

#+PRIORITIES: A C B

Or, using numeric values:

#+PRIORITIES: 1 10 5

5.5 Breaking Down Tasks into Subtasks ¶

It is often advisable to break down large tasks into smaller, manageable subtasks. You can do this by creating an outline tree below a TODO item, with detailed subtasks on the tree⁴⁶. To keep an overview of the fraction of subtasks that have already been marked as done, insert either ‘[/]’ or ‘[%]’ anywhere in the headline. These cookies are updated each time the TODO status of a child changes, or when pressing C-c C-c on the cookie. For example:

* Organize Party [33%]
** TODO Call people [1/2]
*** TODO Peter
*** DONE Sarah
** TODO Buy food
** DONE Talk to neighbor

If a heading has both checkboxes and TODO children below it, the meaning of the statistics cookie become ambiguous. Set the property ‘COOKIE_DATA’ to either ‘checkbox’ or ‘todo’ to resolve this issue.

If you would like to have the statistics cookie count any TODO entries in the subtree (not just direct children), configure the variable org-hierarchical-todo-statistics. To do this for a single subtree, include the word ‘recursive’ into the value of the ‘COOKIE_DATA’ property.

* Parent capturing statistics [2/20]
  :PROPERTIES:
  :COOKIE_DATA: todo recursive
  :END:

If you would like a TODO entry to automatically change to DONE when all children are done, you can use the following setup:

(defun org-summary-todo (n-done n-not-done)
  "Switch entry to DONE when all subentries are done, to TODO otherwise."
  (let (org-log-done org-todo-log-states)   ; turn off logging
    (org-todo (if (= n-not-done 0) "DONE" "TODO"))))

(add-hook 'org-after-todo-statistics-hook #'org-summary-todo)

Another possibility is the use of checkboxes to identify (a hierarchy of) a large number of subtasks (see Checkboxes).

5.6 Checkboxes ¶

Every item in a plain list⁴⁷ (see Plain Lists) can be made into a checkbox by starting it with the string ‘[ ]’. This feature is similar to TODO items (see TODO Items), but is more lightweight. Checkboxes are not included into the global TODO list, so they are often great to split a task into a number of simple steps. Or you can use them in a shopping list.

Here is an example of a checkbox list.

* TODO Organize party [2/4]
  - [-] call people [1/3]
    - [ ] Peter
    - [X] Sarah
    - [ ] Sam
  - [X] order food
  - [ ] think about what music to play
  - [X] talk to the neighbors

Checkboxes work hierarchically, so if a checkbox item has children that are checkboxes, toggling one of the children checkboxes makes the parent checkbox reflect if none, some, or all of the children are checked.

The ‘[2/4]’ and ‘[1/3]’ in the first and second line are cookies indicating how many checkboxes present in this entry have been checked off, and the total number of checkboxes present. This can give you an idea on how many checkboxes remain, even without opening a folded entry. The cookies can be placed into a headline or into (the first line of) a plain list item. Each cookie covers checkboxes of direct children structurally below the headline/item on which the cookie appears⁴⁸. You have to insert the cookie yourself by typing either ‘[/]’ or ‘[%]’. With ‘[/]’ you get an ‘n out of m’ result, as in the examples above. With ‘[%]’ you get information about the percentage of checkboxes checked (in the above example, this would be ‘[50%]’ and ‘[33%]’, respectively). In a headline, a cookie can count either checkboxes below the heading or TODO states of children, and it displays whatever was changed last. Set the property ‘COOKIE_DATA’ to either ‘checkbox’ or ‘todo’ to resolve this issue.

If the current outline node has an ‘ORDERED’ property, checkboxes must be checked off in sequence, and an error is thrown if you try to check off a box while there are unchecked boxes above it.

The following commands work with checkboxes:

C-c C-c (org-toggle-checkbox) ¶

Toggle checkbox status or—with prefix argument—checkbox presence at point. With a single prefix argument, add an empty checkbox or remove the current one⁴⁹. With a double prefix argument, set it to ‘[-]’, which is considered to be an intermediate state.

C-c C-x C-b (org-toggle-checkbox) ¶

Toggle checkbox status or—with prefix argument—checkbox presence at point. With double prefix argument, set it to ‘[-]’, which is considered to be an intermediate state.

• If there is an active region, toggle the first checkbox in the region and set all remaining boxes to the same status as the first. With a prefix argument, add or remove the checkbox for all items in the region.
• If point is in a headline, toggle checkboxes in the region between this headline and the next—so not the entire subtree.
• If there is no active region, just toggle the checkbox at point.

C-c C-x C-r (org-toggle-radio-button) ¶

Toggle checkbox status by using the checkbox of the item at point as a radio button: when the checkbox is turned on, all other checkboxes on the same level will be turned off. With a universal prefix argument, toggle the presence of the checkbox. With a double prefix argument, set it to ‘[-]’.

C-c C-c can be told to consider checkboxes as radio buttons by setting ‘#+ATTR_ORG: :radio t’ right before the list or by calling M-x org-list-checkbox-radio-mode to activate this minor mode.

M-S-RET (org-insert-todo-heading) ¶

Insert a new item with a checkbox. This works only if point is already in a plain list item (see Plain Lists).

C-c C-x o (org-toggle-ordered-property) ¶

Toggle the ‘ORDERED’ property of the entry, to toggle if checkboxes must be checked off in sequence. A property is used for this behavior because this should be local to the current entry, not inherited like a tag. However, if you would like to track the value of this property with a tag for better visibility, customize org-track-ordered-property-with-tag.

C-c # (org-update-statistics-cookies) ¶

Update the statistics cookie in the current outline entry. When called with a C-u prefix, update the entire file. Checkbox statistic cookies are updated automatically if you toggle checkboxes with C-c C-c and make new ones with M-S-RET. TODO statistics cookies update when changing TODO states. If you delete boxes/entries or add/change them by hand, use this command to get things back into sync.

6.1 Tag Inheritance ¶

Tags make use of the hierarchical structure of outline trees. If a heading has a certain tag, all subheadings inherit the tag as well. For example, in the list

* Meeting with the French group      :work:
** Summary by Frank                  :boss:notes:
*** TODO Prepare slides for him      :action:

the final heading has the tags ‘work’, ‘boss’, ‘notes’, and ‘action’ even though the final heading is not explicitly marked with those tags. You can also set tags that all entries in a file should inherit just as if these tags were defined in a hypothetical level zero that surrounds the entire file. Use a line like this⁵⁰

#+FILETAGS: :Peter:Boss:Secret:

To limit tag inheritance to specific tags, or to turn it off entirely, use the variables org-use-tag-inheritance and org-tags-exclude-from-inheritance.

When a headline matches during a tags search while tag inheritance is turned on, all the sublevels in the same tree—for a simple match form—match as well⁵¹. The list of matches may then become very long. If you only want to see the first tags match in a subtree, configure the variable org-tags-match-list-sublevels (not recommended).

Tag inheritance is relevant when the agenda search tries to match a tag, either in the tags or tags-todo agenda types. In other agenda types, org-use-tag-inheritance has no effect. Still, you may want to have your tags correctly set in the agenda, so that tag filtering works fine, with inherited tags. Set org-agenda-use-tag-inheritance to control this: the default value includes all agenda types, but setting this to nil can really speed up agenda generation.

6.2 Setting Tags ¶

Tags can simply be typed into the buffer at the end of a headline. After a colon, M-TAB offers completion on tags. There is also a special command for inserting tags:

C-c C-q (org-set-tags-command) ¶

Enter new tags for the current headline. Org mode either offers completion or a special single-key interface for setting tags, see below. After pressing RET, the tags are inserted and aligned to org-tags-column. When called with a C-u prefix, all tags in the current buffer are aligned to that column, just to make things look nice. Tags are automatically realigned after promotion, demotion, and TODO state changes (see Basic TODO Functionality).

C-c C-c (org-set-tags-command) ¶

When point is in a headline, this does the same as C-c C-q.

Org supports tag insertion based on a list of tags. By default this list is constructed dynamically, containing all tags currently used in the buffer⁵². You may also globally specify a hard list of tags with the variable org-tag-alist. Finally you can set the default tags for a given file using the ‘TAGS’ keyword, like

#+TAGS: @work @home @tennisclub
#+TAGS: laptop car pc sailboat

If you have globally defined your preferred set of tags using the variable org-tag-alist, but would like to use a dynamic tag list in a specific file, add an empty ‘TAGS’ keyword to that file:

#+TAGS:

If you have a preferred set of tags that you would like to use in every file, in addition to those defined on a per-file basis by ‘TAGS’ keyword, then you may specify a list of tags with the variable org-tag-persistent-alist. You may turn this off on a per-file basis by adding a ‘STARTUP’ keyword to that file:

#+STARTUP: noptag

By default Org mode uses the standard minibuffer completion facilities for entering tags. However, it also implements another, quicker, tag selection method called fast tag selection. This allows you to select and deselect tags with just a single key press. For this to work well you should assign unique letters to most of your commonly used tags. You can do this globally by configuring the variable org-tag-alist in your Emacs init file. For example, you may find the need to tag many items in different files with ‘@home’. In this case you can set something like:

(setq org-tag-alist '(("@work" . ?w) ("@home" . ?h) ("laptop" . ?l)))

If the tag is only relevant to the file you are working on, then you can instead set the ‘TAGS’ keyword as:

#+TAGS: @work(w)  @home(h)  @tennisclub(t)  laptop(l)  pc(p)

The tags interface shows the available tags in a splash window. If you want to start a new line after a specific tag, insert ‘\n’ into the tag list

#+TAGS: @work(w) @home(h) @tennisclub(t) \n laptop(l) pc(p)

or write them in two lines:

#+TAGS: @work(w)  @home(h)  @tennisclub(t)
#+TAGS: laptop(l)  pc(p)

You can also group together tags that are mutually exclusive by using braces, as in:

#+TAGS: { @work(w)  @home(h)  @tennisclub(t) }  laptop(l)  pc(p)

you indicate that at most one of ‘@work’, ‘@home’, and ‘@tennisclub’ should be selected. Multiple such groups are allowed.

Do not forget to press C-c C-c with point in one of these lines to activate any changes.

To set these mutually exclusive groups in the variable org-tags-alist, you must use the dummy tags :startgroup and :endgroup instead of the braces. Similarly, you can use :newline to indicate a line break. The previous example would be set globally by the following configuration:

(setq org-tag-alist '((:startgroup . nil)
                      ("@work" . ?w) ("@home" . ?h)
                      ("@tennisclub" . ?t)
                      (:endgroup . nil)
                      ("laptop" . ?l) ("pc" . ?p)))

If at least one tag has a selection key then pressing C-c C-c automatically presents you with a special interface, listing inherited tags, the tags of the current headline, and a list of all valid tags with corresponding keys⁵³.

Pressing keys assigned to tags adds or removes them from the list of tags in the current line. Selecting a tag in a group of mutually exclusive tags turns off any other tag from that group.

In this interface, you can also use the following special keys:

TAB ¶

Enter a tag in the minibuffer, even if the tag is not in the predefined list. You can complete on all tags present in the buffer and globally pre-defined tags from org-tag-alist and org-tag-persistent-alist. You can also add several tags: just separate them with a comma.

SPC ¶

Clear all tags for this line.

RET ¶

Accept the modified set.

C-g ¶

Abort without installing changes.

q ¶

If q is not assigned to a tag, it aborts like C-g.

! ¶

Turn off groups of mutually exclusive tags. Use this to (as an exception) assign several tags from such a group.

C-c ¶

Toggle auto-exit after the next change (see below). If you are using expert mode, the first C-c displays the selection window.

This method lets you assign tags to a headline with very few keys. With the above setup, you could clear the current tags and set ‘@home’, ‘laptop’ and ‘pc’ tags with just the following keys: C-c C-c SPC h l p RET. Switching from ‘@home’ to ‘@work’ would be done with C-c C-c w RET or alternatively with C-c C-c C-c w. Adding the non-predefined tag ‘sarah’ could be done with C-c C-c TAB s a r a h RET.

If you find that most of the time you need only a single key press to modify your list of tags, set the variable org-fast-tag-selection-single-key. Then you no longer have to press RET to exit fast tag selection—it exits after the first change. If you then occasionally need more keys, press C-c to turn off auto-exit for the current tag selection process (in effect: start selection with C-c C-c C-c instead of C-c C-c). If you set the variable to the value expert, the special window is not even shown for single-key tag selection, it comes up only when you press an extra C-c.

6.3 Tag Hierarchy ¶

Tags can be defined in hierarchies. A tag can be defined as a group tag for a set of other tags. The group tag can be seen as the “broader term” for its set of tags. Defining multiple group tags and nesting them creates a tag hierarchy.

One use-case is to create a taxonomy of terms (tags) that can be used to classify nodes in a document or set of documents.

When you search for a group tag, it return matches for all members in the group and its subgroups. In an agenda view, filtering by a group tag displays or hide headlines tagged with at least one of the members of the group or any of its subgroups. This makes tag searches and filters even more flexible.

You can set group tags by using brackets and inserting a colon between the group tag and its related tags—beware that all whitespaces are mandatory so that Org can parse this line correctly:

#+TAGS: [ GTD : Control Persp ]

In this example, ‘GTD’ is the group tag and it is related to two other tags: ‘Control’, ‘Persp’. Defining ‘Control’ and ‘Persp’ as group tags creates a hierarchy of tags:

#+TAGS: [ Control : Context Task ]
#+TAGS: [ Persp : Vision Goal AOF Project ]

That can conceptually be seen as a hierarchy of tags:

• ‘GTD’
  • ‘Persp’
    • ‘Vision’
    • ‘Goal’
    • ‘AOF’
    • ‘Project’
  • ‘Control’
    • ‘Context’
    • ‘Task’

You can use the :startgrouptag, :grouptags and :endgrouptag keyword directly when setting org-tag-alist directly:

(setq org-tag-alist '((:startgrouptag)
                      ("GTD")
                      (:grouptags)
                      ("Control")
                      ("Persp")
                      (:endgrouptag)
                      (:startgrouptag)
                      ("Control")
                      (:grouptags)
                      ("Context")
                      ("Task")
                      (:endgrouptag)))

The tags in a group can be mutually exclusive if using the same group syntax as is used for grouping mutually exclusive tags together; using curly brackets.

#+TAGS: { Context : @Home @Work @Call }

When setting org-tag-alist you can use :startgroup and :endgroup instead of :startgrouptag and :endgrouptag to make the tags mutually exclusive.

Furthermore, the members of a group tag can also be regular expressions, creating the possibility of a more dynamic and rule-based tag structure (see Regular Expressions). The regular expressions in the group must be specified within curly brackets. Here is an expanded example:

#+TAGS: [ Vision : {V@.+} ]
#+TAGS: [ Goal : {G@.+} ]
#+TAGS: [ AOF : {AOF@.+} ]
#+TAGS: [ Project : {P@.+} ]

Searching for the tag ‘Project’ now lists all tags also including regular expression matches for ‘P@.+’, and similarly for tag searches on ‘Vision’, ‘Goal’ and ‘AOF’. For example, this would work well for a project tagged with a common project-identifier, e.g., ‘P@2014_OrgTags’.

If you want to ignore group tags temporarily, toggle group tags support with org-toggle-tags-groups, bound to C-c C-x q. If you want to disable tag groups completely, set org-group-tags to nil.

6.4 Tag Searches ¶

Once a system of tags has been set up, it can be used to collect related information into special lists.

C-c / m or C-c \ (org-match-sparse-tree) ¶

Create a sparse tree with all headlines matching a tags search. With a C-u prefix argument, ignore headlines that are not a TODO line.

M-x org-agenda m (org-tags-view) ¶

Create a global list of tag matches from all agenda files. See Matching tags and properties.

M-x org-agenda M (org-tags-view) ¶

Create a global list of tag matches from all agenda files, but check only TODO items and force checking subitems (see the option org-tags-match-list-sublevels).

These commands all prompt for a match string which allows basic Boolean logic like ‘+boss+urgent-project1’, to find entries with tags ‘boss’ and ‘urgent’, but not ‘project1’, or ‘Kathy|Sally’ to find entries which are tagged, like ‘Kathy’ or ‘Sally’. The full syntax of the search string is rich and allows also matching against TODO keywords, entry levels and properties. For a complete description with many examples, see Matching tags and properties.

7.1 Property Syntax ¶

Properties are key–value pairs. When they are associated with a single entry or with a tree they need to be inserted into a special drawer (see Drawers) with the name ‘PROPERTIES’, which has to be located right below a headline, and its planning line (see Deadlines and Scheduling) when applicable. Each property is specified on a single line, with the key—surrounded by colons—first, and the value after it. Keys are case-insensitive. Here is an example:

* CD collection
** Classic
*** Goldberg Variations
    :PROPERTIES:
    :Title:     Goldberg Variations
    :Composer:  J.S. Bach
    :Artist:    Glenn Gould
    :Publisher: Deutsche Grammophon
    :NDisks:    1
    :END:

Depending on the value of org-use-property-inheritance, a property set this way is associated either with a single entry, or with the subtree defined by the entry, see Property Inheritance.

You may define the allowed values for a particular property ‘Xyz’ by setting a property ‘Xyz_ALL’. This special property is inherited, so if you set it in a level 1 entry, it applies to the entire tree. When allowed values are defined, setting the corresponding property becomes easier and is less prone to typing errors. For the example with the CD collection, we can pre-define publishers and the number of disks in a box like this:

* CD collection
  :PROPERTIES:
  :NDisks_ALL:  1 2 3 4
  :Publisher_ALL: "Deutsche Grammophon" Philips EMI
  :END:

Properties can be inserted on buffer level. That means they apply before the first headline and can be inherited by all entries in a file. Property blocks defined before first headline needs to be located at the top of the buffer, allowing only comments above.

Properties can also be defined using lines like:

#+PROPERTY: NDisks_ALL 1 2 3 4

If you want to add to the value of an existing property, append a ‘+’ to the property name. The following results in the property ‘var’ having the value ‘foo=1 bar=2’.

#+PROPERTY: var  foo=1
#+PROPERTY: var+ bar=2

It is also possible to add to the values of inherited properties. The following results in the ‘Genres’ property having the value ‘Classic Baroque’ under the ‘Goldberg Variations’ subtree.

* CD collection
** Classic
    :PROPERTIES:
    :Genres: Classic
    :END:
*** Goldberg Variations
    :PROPERTIES:
    :Title:     Goldberg Variations
    :Composer:  J.S. Bach
    :Artist:    Glenn Gould
    :Publisher: Deutsche Grammophon
    :NDisks:    1
    :Genres+:   Baroque
    :END:

Note that a property can only have one entry per drawer.

Property values set with the global variable org-global-properties can be inherited by all entries in all Org files.

The following commands help to work with properties:

M-TAB (pcomplete) ¶

After an initial colon in a line, complete property keys. All keys used in the current file are offered as possible completions.

C-c C-x p (org-set-property) ¶

Set a property. This prompts for a property name and a value. If necessary, the property drawer is created as well.

C-u M-x org-insert-drawer ¶

Insert a property drawer into the current entry. The drawer is inserted early in the entry, but after the lines with planning information like deadlines. If before first headline the drawer is inserted at the top of the drawer after any potential comments.

C-c C-c (org-property-action) ¶

With point in a property drawer, this executes property commands.

C-c C-c s (org-set-property) ¶

Set a property in the current entry. Both the property and the value can be inserted using completion.

S-RIGHT (org-property-next-allowed-value) ¶

S-LEFT (org-property-previous-allowed-value)

Switch property at point to the next/previous allowed value.

C-c C-c d (org-delete-property) ¶

Remove a property from the current entry.

C-c C-c D (org-delete-property-globally) ¶

Globally remove a property, from all entries in the current file.

C-c C-c c (org-compute-property-at-point) ¶

Compute the property at point, using the operator and scope from the nearest column format definition.

7.2 Special Properties ¶

Special properties provide an alternative access method to Org mode features, like the TODO state or the priority of an entry, discussed in the previous chapters. This interface exists so that you can include these states in a column view (see Column View), or to use them in queries. The following property names are special and should not be used as keys in the properties drawer:

7.3 Property Searches ¶

To create sparse trees and special lists with selection based on properties, the same commands are used as for tag searches (see Tag Searches).

C-c / m or C-c \ (org-match-sparse-tree) ¶

Create a sparse tree with all matching entries. With a C-u prefix argument, ignore headlines that are not a TODO line.

M-x org-agenda m (org-tags-view) ¶

Create a global list of tag/property matches from all agenda files.

M-x org-agenda M (org-tags-view) ¶

Create a global list of tag matches from all agenda files, but check only TODO items and force checking of subitems (see the option org-tags-match-list-sublevels).

The syntax for the search string is described in Matching tags and properties.

There is also a special command for creating sparse trees based on a single property:

C-c / p ¶

Create a sparse tree based on the value of a property. This first prompts for the name of a property, and then for a value. A sparse tree is created with all entries that define this property with the given value. If you enclose the value in curly braces, it is interpreted as a regular expression and matched against the property values (see Regular Expressions).

7.4 Property Inheritance ¶

The outline structure of Org documents lends itself to an inheritance model of properties: if the parent in a tree has a certain property, the children can inherit this property. Org mode does not turn this on by default, because it can slow down property searches significantly and is often not needed. However, if you find inheritance useful, you can turn it on by setting the variable org-use-property-inheritance. It may be set to t to make all properties inherited from the parent, to a list of properties that should be inherited, or to a regular expression that matches inherited properties. If a property has the value nil, this is interpreted as an explicit un-define of the property, so that inheritance search stops at this value and returns nil.

Org mode has a few properties for which inheritance is hard-coded, at least for the special applications for which they are used:

COLUMNS ¶

The ‘COLUMNS’ property defines the format of column view (see Column View). It is inherited in the sense that the level where a ‘COLUMNS’ property is defined is used as the starting point for a column view table, independently of the location in the subtree from where columns view is turned on.

CATEGORY ¶

For agenda view, a category set through a ‘CATEGORY’ property applies to the entire subtree.

ARCHIVE ¶

For archiving, the ‘ARCHIVE’ property may define the archive location for the entire subtree (see Moving a tree to an archive file).

LOGGING ¶

The ‘LOGGING’ property may define logging settings for an entry or a subtree (see Tracking TODO state changes).

7.5 Column View ¶

A great way to view and edit properties in an outline tree is column view. In column view, each outline node is turned into a table row. Columns in this table provide access to properties of the entries. Org mode implements columns by overlaying a tabular structure over the headline of each item. While the headlines have been turned into a table row, you can still change the visibility of the outline tree. For example, you get a compact table by switching to “contents” view—S-TAB S-TAB, or simply c while column view is active—but you can still open, read, and edit the entry below each headline. Or, you can switch to column view after executing a sparse tree command and in this way get a table only for the selected items. Column view also works in agenda buffers (see Agenda Views) where queries have collected selected items, possibly from a number of files.

• Defining columns
• Using column view
• Capturing column view

** Top node for columns view
   :PROPERTIES:
   :COLUMNS: %25ITEM %TAGS %PRIORITY %TODO
   :END:

#+COLUMNS: %25ITEM %TAGS %PRIORITY %TODO

%[WIDTH]PROPERTY[(TITLE)][{SUMMARY-TYPE}]

:COLUMNS:  %25ITEM %9Approved(Approved?){X} %Owner %11Status \
                   %10Time_Estimate{:} %CLOCKSUM %CLOCKSUM_T
:Owner_ALL:    Tammy Mark Karl Lisa Don
:Status_ALL:   "In progress" "Not started yet" "Finished" ""
:Approved_ALL: "[ ]" "[X]"

* The column view
#+BEGIN: columnview :hlines 1 :id "label"

#+END:

8.1 Timestamps ¶

A timestamp is a specification of a date (possibly with a time or a range of times) in a special format, either ‘<2003-09-16 Tue>’ or ‘<2003-09-16 Tue 09:39>’ or ‘<2003-09-16 Tue 12:00-12:30>’⁵⁸. A timestamp can appear anywhere in the headline or body of an Org tree entry. Its presence causes entries to be shown on specific dates in the agenda (see Weekly/daily agenda). We distinguish:

Plain timestamp; Event; Appointment ¶

A simple timestamp just assigns a date/time to an item. This is just like writing down an appointment or event in a paper agenda. In the agenda display, the headline of an entry associated with a plain timestamp is shown exactly on that date.

* Meet Peter at the movies
  <2006-11-01 Wed 19:15>
* Discussion on climate change
  <2006-11-02 Thu 20:00-22:00>

Timestamp with repeater interval ¶

A timestamp may contain a repeater interval, indicating that it applies not only on the given date, but again and again after a certain interval of N hours (h), days (d), weeks (w), months (m), or years (y). The following shows up in the agenda every Wednesday:

* Pick up Sam at school
  <2007-05-16 Wed 12:30 +1w>

Diary-style expression entries ¶

For more complex date specifications, Org mode supports using the special expression diary entries implemented in the Emacs Calendar package⁵⁹. For example, with optional time:

* 22:00-23:00 The nerd meeting on every 2nd Thursday of the month
  <%%(diary-float t 4 2)>

Time/Date range ¶

Two timestamps connected by ‘--’ denote a range. The headline is shown on the first and last day of the range, and on any dates that are displayed and fall in the range. Here is an example:

** Meeting in Amsterdam
   <2004-08-23 Mon>--<2004-08-26 Thu>

Inactive timestamp ¶

Just like a plain timestamp, but with square brackets instead of angular ones. These timestamps are inactive in the sense that they do not trigger an entry to show up in the agenda.

* Gillian comes late for the fifth time
  [2006-11-01 Wed]

8.2 Creating Timestamps ¶

For Org mode to recognize timestamps, they need to be in the specific format. All commands listed below produce timestamps in the correct format.

C-c . (org-time-stamp) ¶

Prompt for a date and insert a corresponding timestamp. When point is at an existing timestamp in the buffer, the command is used to modify this timestamp instead of inserting a new one. When this command is used twice in succession, a time range is inserted.

When called with a prefix argument, use the alternative format which contains date and time. The default time can be rounded to multiples of 5 minutes. See the option org-time-stamp-rounding-minutes.

With two prefix arguments, insert an active timestamp with the current time without prompting.

C-c ! (org-time-stamp-inactive) ¶

Like C-c ., but insert an inactive timestamp that does not cause an agenda entry.

C-c C-c ¶

Normalize timestamp, insert or fix day name if missing or wrong.

C-c < (org-date-from-calendar) ¶

Insert a timestamp corresponding to point date in the calendar.

C-c > (org-goto-calendar) ¶

Access the Emacs calendar for the current date. If there is a timestamp in the current line, go to the corresponding date instead.

C-c C-o (org-open-at-point) ¶

Access the agenda for the date given by the timestamp or -range at point (see Weekly/daily agenda).

S-LEFT (org-timestamp-down-day) ¶

S-RIGHT (org-timestamp-up-day)

Change date at point by one day. These key bindings conflict with shift-selection and related modes (see Packages that conflict with Org mode).

S-UP (org-timestamp-up) ¶

S-DOWN (org-timestamp-down)

On the beginning or enclosing bracket of a timestamp, change its type. Within a timestamp, change the item under point. Point can be on a year, month, day, hour or minute. When the timestamp contains a time range like ‘15:30-16:30’, modifying the first time also shifts the second, shifting the time block with constant length. To change the length, modify the second time. Note that if point is in a headline and not at a timestamp, these same keys modify the priority of an item (see Priorities). The key bindings also conflict with shift-selection and related modes (see Packages that conflict with Org mode).

C-c C-y (org-evaluate-time-range) ¶

Evaluate a time range by computing the difference between start and end. With a prefix argument, insert result after the time range (in a table: into the following column).

• The date/time prompt
• Custom time format

8.3 Deadlines and Scheduling ¶

A timestamp may be preceded by special keywords to facilitate planning. Both the timestamp and the keyword have to be positioned immediately after the task they refer to.

‘DEADLINE’ ¶

Meaning: the task—most likely a TODO item, though not necessarily—is supposed to be finished on that date.

On the deadline date, the task is listed in the agenda. In addition, the agenda for today carries a warning about the approaching or missed deadline, starting org-deadline-warning-days before the due date, and continuing until the entry is marked as done. An example:

*** TODO write article about the Earth for the Guide
    DEADLINE: <2004-02-29 Sun>
    The editor in charge is [[bbdb:Ford Prefect]]

You can specify a different lead time for warnings for a specific deadlines using the following syntax. Here is an example with a warning period of 5 days ‘DEADLINE: <2004-02-29 Sun -5d>’. This warning is deactivated if the task gets scheduled and you set org-agenda-skip-deadline-prewarning-if-scheduled to t.

‘SCHEDULED’ ¶

Meaning: you are planning to start working on that task on the given date.

The headline is listed under the given date⁶⁴. In addition, a reminder that the scheduled date has passed is present in the compilation for today, until the entry is marked as done, i.e., the task is automatically forwarded until completed.

*** TODO Call Trillian for a date on New Years Eve.
    SCHEDULED: <2004-12-25 Sat>

If you want to delay the display of this task in the agenda, use ‘SCHEDULED: <2004-12-25 Sat -2d>’: the task is still scheduled on the 25th but will appear two days later. In case the task contains a repeater, the delay is considered to affect all occurrences; if you want the delay to only affect the first scheduled occurrence of the task, use ‘--2d’ instead. See org-scheduled-delay-days and org-agenda-skip-scheduled-delay-if-deadline for details on how to control this globally or per agenda.

Important: Scheduling an item in Org mode should not be understood in the same way that we understand scheduling a meeting. Setting a date for a meeting is just a simple appointment, you should mark this entry with a simple plain timestamp, to get this item shown on the date where it applies. This is a frequent misunderstanding by Org users. In Org mode, scheduling means setting a date when you want to start working on an action item.

You may use timestamps with repeaters in scheduling and deadline entries. Org mode issues early and late warnings based on the assumption that the timestamp represents the nearest instance of the repeater. However, the use of diary expression entries like

<%%(diary-float t 42)>

in scheduling and deadline timestamps is limited. Org mode does not know enough about the internals of each function to issue early and late warnings. However, it shows the item on each day where the expression entry matches.

• Inserting deadlines or schedules
• Repeated tasks

** TODO Pay the rent
   DEADLINE: <2005-10-01 Sat +1m>

DEADLINE: <2005-10-01 Sat +1m -3d>

** TODO Pay the rent
   DEADLINE: <2005-11-01 Tue +1m>

** TODO Call Father
   DEADLINE: <2008-02-10 Sun ++1w>
   Marking this DONE shifts the date by at least one week, but also
   by as many weeks as it takes to get this date into the future.
   However, it stays on a Sunday, even if you called and marked it
   done on Saturday.

** TODO Empty kitchen trash
   DEADLINE: <2008-02-08 Fri 20:00 ++1d>
   Marking this DONE shifts the date by at least one day, and also
   by as many days as it takes to get the timestamp into the future.
   Since there is a time in the timestamp, the next deadline in the
   future will be on today's date if you complete the task before
   20:00.

** TODO Check the batteries in the smoke detectors
   DEADLINE: <2005-11-01 Tue .+1m>
   Marking this DONE shifts the date to one month after today.

** TODO Wash my hands
   DEADLINE: <2019-04-05 08:00 Fri .+1h>
   Marking this DONE shifts the date to exactly one hour from now.

8.4 Clocking Work Time ¶

Org mode allows you to clock the time you spend on specific tasks in a project. When you start working on an item, you can start the clock. When you stop working on that task, or when you mark the task done, the clock is stopped and the corresponding time interval is recorded. It also computes the total time spent on each subtree⁷¹ of a project. And it remembers a history or tasks recently clocked, so that you can jump quickly between a number of tasks absorbing your time.

To save the clock history across Emacs sessions, use:

(setq org-clock-persist 'history)
(org-clock-persistence-insinuate)

When you clock into a new task after resuming Emacs, the incomplete clock⁷² is retrieved (see Resolving idle time (1)) and you are prompted about what to do with it.

• Clocking commands
• The clock table
• Resolving idle time and continuous clocking