This manual documents the GNU Shepherd version 0.9.3, a service manager for the GNU system.
This manual documents the GNU Daemon Shepherd, or GNU Shepherd for short. The Shepherd looks after system services, typically daemons. It is used to start and stop them in a reliable fashion. For instance it will dynamically determine and start any other services that our desired service depends upon. As another example, the Shepherd might detect conflicts among services. In this situation it would simply prevent the conflicting services from running concurrently.
The Shepherd is the init system of the GNU operating system—it is the
first user process that gets started, typically with PID 1, and runs
as root. Normally the purpose of init systems is to manage all
system-wide services, but the Shepherd can also be a useful tool assisting
unprivileged users in the management of their own daemons.
Flexible software requires some time to master and
the Shepherd is no different. But don’t worry: this manual should allow you to
get started quickly. Its first chapter is designed as a practical
introduction to the Shepherd and should be all you need for everyday use
(see Jump Start). In chapter two we will describe the
herd and shepherd programs, and their relationship, in
more detail (herd and shepherd). Subsequent chapters provide a full
reference manual and plenty of examples, covering all of Shepherd’s
capabilities. Finally, the last chapter provides information for
those souls brave enough to hack the Shepherd itself.
The Shepherd was formerly known as “dmd”, which stands for Daemon Managing Daemons (or Daemons-Managing Daemon?).
This program is written in Guile, an implementation of the Scheme programming language, using the GOOPS extension for object-orientation. Guile is also the Shepherd’s configuration language. See Introduction in GNU Guile Reference Manual, for an introduction to Guile. We have tried to make the Shepherd’s basic features as accessible as possible—you should be able to use these even if you do not know how to program in Scheme. A basic grasp of Guile and GOOPS is required only if you wish to make use of the Shepherd’s more advanced features.
This chapter gives a short overview of the Shepherd. It is enough if you just need the basic features of it. As it is not assumed that readers are familiar with all the involved issues, a very experienced user might be annoyed by the often very detailed descriptions in this introduction. Those users are encouraged to just skip to the reference section.
Note that all the full file names in the following text are based on
the assumption that you have installed the Shepherd with an empty prefix. If
your Shepherd installation for example resides in /usr/local
instead, add this directory name in front of the absolute file names
mentioned below.
When shepherd gets started, it reads and evaluates a
configuration file. When it is started with superuser privileges, it
tries to use /etc/shepherd.scm. When started as normal user, it
looks for a file called $XDG_CONFIG_HOME/shepherd/init.scm. If
the XDG_CONFIG_HOME environment variable is not defined,
$HOME/.config/shepherd/init.scm is used instead (see Managing User Services). With the option --config (or, for short,
-c), you can specify where to look instead. So if you want to
start shepherd with an alternative file, use one of the
following commands:
shepherd --config=/etc/shepherd.scm.old shepherd -c /etc/shepherd.scm.old
As the final “d” suggests, shepherd is just
a daemon that (usually) runs in the
background, so you will not interact with it directly. After it is
started, shepherd will listen on a socket special file, usually
/var/run/shepherd/socket, for further commands. You use the tool
herd to send these commands to shepherd. Usage of herd is simple and
straightforward: To start a service called apache, you use:
herd start apache
When you do this, all its dependencies will get resolved. For
example, a webserver is quite likely to depend on working networking,
thus it will depend on a service called networking. So if you
want to start apache, and networking is not yet running, it
will automatically be started as well. The current status of all the
services defined in the configuration file can be queried like this:
herd status
Or, to get additional details about each service, run:
herd detailed-status
In this example, this would show the networking and apache
services as started. If you just want to know the status of the
apache service, run:
herd status apache
You can stop
a service and all the services that depend on it will be stopped.
Using the example above, if you stop networking, the service
apache will be stopped as well—which makes perfect sense,
as it cannot work without the network being up. To actually stop a
service, you use the following, probably not very surprising, command:
herd stop networking
There are two more actions you can perform on every service: the
actions enable and disable are used to prevent and allow
starting of the particular service. If a service is intended to be
restarted whenever it terminates (how this can be done will not be
covered in this introduction), but it is respawning too often in a
short period of time (by default 5 times in 5 seconds), it will
automatically be disabled. After you have fixed the problem that
caused it from being respawned too fast, you can start it again with
the commands:
herd enable foo herd start foo
But there is far more you can do than just that. Services can not
only simply depend on other services, they can also depend on
virtual services. A virtual service is a service that is
provided by one or more service additionally. For instance, a service
called exim might provide the virtual service
mailer-daemon. That could as well be provided by a service
called smail, as both are mailer-daemons. If a service needs
any mailer-daemon, no matter which one, it can just depend on
mailer-daemon, and one of those who provide it gets started (if
none is running yet) when resolving dependencies. The nice thing is
that, if trying to start one of them fails, shepherd will go on and try to
start the next one, so you can also use virtual services for
specifying fallbacks.
Additionally to all that, you can perform service-specific actions.
Coming back to our original example, apache is able to
reload its modules, therefore the action reload-modules might
be available:
herd reload-modules apache
Service-specific actions can only be used when the service is started, i.e. the only thing you can do to a stopped service is starting it. An exception exists, see below. (If you may at some point find this too restrictive because you want to use variants of the same service which are started in different ways, consider using different services for those variants instead, which all provide the same virtual service and thus conflict with each other, if this is desired. That’s one of the reasons why virtual services exist, after all.)
There are two actions which are special, because even if services
can implement them on their own, a default implementation is provided
by shepherd (another reason why they are special is that the default
implementations can be called even when the service is not running;
this inconsistency is just to make it more intuitive to get
information about the status of a service, see below).
These actions are restart and status. The default
implementation of restart calls stop and start on the
affected service, taking care to also restart any dependent services. The
default implementation of status displays some general information
about the service, like what it provides, what it depends on and with which
other services it conflicts (because they provide a virtual service that is
also provided by that particular service).
A special service is root, which is used for controlling the
Shepherd itself. You can also reference to this service as
shepherd. It implements various actions. For example, the
status action displays which services are started and which ones
are stopped, whereas detailed-status has the effect of applying
the default implementation of status to all services one after
another. The load action is unusual insofar as it shows a
feature that is actually available to all services, but which we have
not seen yet: It takes an additional argument. You can use load
to load arbitrary code into the Shepherd at runtime, like this:
herd load shepherd ~/additional-services.scm
In the same vein the special action doc describes its service
when called without an argument or describes a service-specific action
when called with the action as the additional arguments. You can even
get the list of the service-specific actions a service provides when
using with the additional argument list-actions.
$ herd doc root The root service is used to operate on shepherd itself. $ herd doc root list-actions root (help status halt power-off load eval unload reload daemonize persistency no-persistency cd restart) $ herd doc root action power-off power-off: Halt the system and turn it off.
This is enough now about the herd and shepherd programs, we
will now take a look at how to configure the Shepherd. In the configuration
file, we need mainly the definition of services. We can also do
various other things there, like starting a few services already.
FIXME: Finish. For now, look at the doc/examples/ subdirectory.
...
Ok, to summarize:
shepherd is a daemon, herd the program that controls it.
root/shepherd service is used to control
shepherd itself.
herd and shepherd ¶The daemon that runs in the background and is responsible for
controlling the services is shepherd, while the user interface
tool is called herd: it’s the command that allows you to
actually herd your daemons1. To perform an
action, like stopping a service or calling an action of a service, you
use the herd program. It will communicate with shepherd over a Unix
Domain Socket.
Thus, you start shepherd once, and then always use herd whenever you want
to do something service-related. Since herd passes its current
working directory to shepherd, you can pass relative file names without
trouble. Both shepherd and herd understand the standard arguments
--help, --version and --usage.
shepherd ¶The shepherd program has the following synopsis:
shepherd [option...]
It accepts the following options:
Read and evaluate file as the configuration script on startup.
file is evaluated in the context of a fresh module where bindings
from the (shepherd service) module and Guile’s (oop goops) are
available, in addition to the default set of Guile bindings. In
particular, this means that code in file may use
register-services, the <service> class, and related tools
(see Services).
Do not check if the directory where the socket—our communication
rendez-vous with herd—is located has permissions 700.
If this option is not specified, shepherd will abort if the
permissions are not as expected.
Log output into file.
For unprivileged users, the default log file is $XDG_STATE_HOME/shepherd/shepherd.log with $XDG_STATE_HOME defaulting to $HOME/.local/state.
When running as root, the default behavior is to connect to
/dev/log, the syslog socket (see Overview of Syslog in The GNU C Library Reference Manual). A syslog daemon,
syslogd, is expected to read messages from there
(see syslogd in GNU Inetutils).
When /dev/log is unavailable, for instance because
syslogd is not running, as is the case during system startup
and shutdown, shepherd falls back to the Linux kernel
ring buffer, /dev/kmsg. If /dev/kmsg is missing, as
is the case on other operating systems, it falls back to
/dev/console.
When shepherd is ready to accept connections, write its PID to file or
to the standard output if file is omitted.
Receive further commands on the socket special file file. If this
option is not specified, localstatedir/run/shepherd/socket is
taken when running as root; when running as an unprivileged
user, shepherd listens to /run/user/uid/shepherd/socket,
where uid is the user’s numerical ID2, or to
$XDG_RUNTIME_DIR/shepherd when the XDG_RUNTIME_DIR
environment variable is defined.
If - is specified as file name, commands will be read from
standard input, one per line, as would be passed on a herd
command line (see Invoking herd).
Synonym for --silent.
herd ¶The herd command is a generic client program to control a
running instance of shepherd (see Invoking shepherd).
When running as root, it communicates with the system
instance—the process with PID 1; when running as a normal user,
it communicates with the user’s instance, which is a regular,
unprivileged process managing the user’s own services. For example, the
following command displays the status of all the system services:
sudo herd status
Conversely, the command below displays the status of user
services, assuming a user shepherd is running:
herd status
The command has the following synopsis:
herd [option...] action [service [arg...]]
It causes the action of the service to be invoked. When
service is omitted and action is status or
detailed-status, the root service is used3 (see The root and unknown services, for
more information on the root service.)
For each action, you should pass the appropriate args. Actions
that are available for every service are start, stop,
restart, status, enable, disable, and
doc.
If you pass a file name as an arg, it will be passed as-is to
the Shepherd, thus if it is not an absolute name, it is local to the current
working directory of shepherd, not to herd.
The herd command understands the following option:
Send commands to the socket special file file. If this option is not specified, localstatedir/run/shepherd/socket is taken.
The herd command returns zero on success, and a non-zero exit
code on failure. In particular, it returns a non-zero exit code when
action or service does not exist and when the given action
failed.
reboot ¶The reboot command is a convenience client program to instruct
the Shepherd (when used as an init system) to stop all running services and
reboot the system. It has the following synopsis:
reboot [option...]
It is equivalent to running herd stop shepherd. The
reboot command understands the following option:
Send commands to the socket special file file. If this option is not specified, localstatedir/run/shepherd/socket is taken.
halt ¶The halt command is a convenience client program to instruct
the Shepherd (when used as an init system) to stop all running services and turn
off the system. It has the following synopsis:
halt [option...]
It is equivalent to running herd power-off shepherd. As
usual, the halt command understands the following option:
Send commands to the socket special file file. If this option is not specified, localstatedir/run/shepherd/socket is taken.
The service is obviously a very important concept of the Shepherd. On the
Guile level, a service is represented as an instance of
<service>, a GOOPS class (see GOOPS in GNU Guile
Reference Manual). When creating an instance of it, you can specify
the initial values of its slots, and you actually must do this for some
of the slots.
The <service> class and its associated procedures and methods are
defined in the (shepherd service) module.
root and unknown servicesA service has the following slots, all of which can be initialized
with a keyword (i.e. #:provides, used when creating the object)
of the same name, except where stated otherwise. You should not
access them directly with slot-ref or slot-set!
usually, use the methods of the service class Methods of services instead.
provides is a list of symbols that are provided by the service.
A symbol can only be provided by one service running at a time,
i.e. if two services provide the same symbol, only one of them can
run, starting the other one will fail. Therefore, these symbols are
mainly used to denote conflicting services. The first symbol in the
list is the canonical name for the service, thus it must be unique.
This slot has no default value and must therefore be initialized.
requires is, like provides, a list of symbols that
specify services. In this case, they name what this service depends
on, i.e. before the service can be started, services that provide
those symbols must be started. If a required symbol is provided by
several services, one will be started. By default, this slot
contains the empty list.
running is a hook that can be used by each service in its own
way. The default value is #f, which indicates that the service
is not running. When an attempt is made to start the service, it will
be set to the return value of the procedure in the start slot.
It will also be passed as an argument to the procedure in the
stop slot. If it is set a value that is an integer, it is
assumed to be a process id, and shepherd will monitor the process for
unexpected exits. If it is a procedure, that procedure is called to get
at the underlying value. This slot cannot be initialized with a keyword.
respawn? specifies whether the service should be respawned by
the Shepherd. If this slot has the value #t, then assume the
running slot specifies a child process PID and restart the
service if that process terminates. Otherwise this slot is #f,
which is the default. See also the last-respawns slot.
one-shot? slot determines whether the service is a one-shot
service. A one-shot service is a service that, as soon as it has been
successfully started, is marked as “stopped.” Other services can
nonetheless require one-shot services. One-shot services are useful to
trigger an action before other services are started, such as a cleanup or an
initialization action.
As for other services, the start method of a one-shot service must
return a truth value to indicate success, and false to indicate failure.
transient? slot determines whether the service is a
transient service. A transient service is automatically
unregistered when it terminates, be it because its stop method is
called or because its associated process terminates.
This is useful in the uncommon case of synthesized services that may not be restarted once they have completed.
start contains the “constructor” for the service, which will
be called to start the service. (Therefore, it is not a constructor
in the sense that it initializes the slots of a <service>
object.) This must be a procedure that accepts any amount of
arguments, which will be the additional arguments supplied by the
user. If the starting attempt failed, it must return #f. The
value will be stored in the running slot. The default value is
a procedure that returns #t and performs no further actions,
therefore it is desirable to specify a different one usually.
stop is, similar to start, a slot containing a
procedure. But in this case, it gets the current value of the
running slot as first argument and the user-supplied arguments
as further arguments; it gets called to stop the service. Its return
value will again be stored in the running slot, so that it
should return #f if it is now possible again to start the
service at a later point. The default value is a procedure that
returns #f and performs no further actions.
handle-termination slot contains the procedure to call when
the process associated with a service—the process whose PID appears in
the running slot—terminates. It is passed the service and its
exit status, an integer as returned by waitpid (see waitpid in GNU Guile Reference Manual).
The default handler is the default-service-termination-handler
procedure, which respawns the service if applicable.
actions specifies the additional actions that can be performed
on a service when it is running. A typical example for this is the
restart action. The macro make-actions Service Convenience is provided to abstract the actual data representation
format for this slot. (It actually is a hash currently.)
enabled? cannot be initialized with a keyword, and contains
#t by default. When the value becomes #f at some point,
this will prevent the service from getting started. A service can be
enabled and disabled with the methods enable and
disable, respectively Methods of services.
last-respawns cannot be initialized with a keyword and is only
ever used when the respawn? slot contains #t; it is a
circular list with (car respawn-limit) elements, where each
element contains the time when it was restarted, initially all 0,
later a time in seconds since the Epoch. The first element is the one
that contains the oldest one, the last one the newest.
stop-delay? being false causes the stop slot to be
unused; instead, stopping the service will just cause the
waiting-for-termination? slot be set to #t.
waiting-for-termination? cannot be initialized with a keyword
and should not be used by others, it is only used internally for
respawnable services when the stop-delay? slot contains a true
value. waiting-for-termination? contains #t if the
service is still running, but the user requested that it be stopped,
in which case if the service terminates the next time, the respawn
handler will not start it again.
otherwise #f.
replacement specifies a service to be used to replace this one
when it is stopped. This service will continue to function normally
until the stop action is invoked. After the service has been
successfully stopped, its definition will be replaced by the value of
this slot, which must itself be a service. This slot is ignored if
its value is #f.
Start the service obj, including all the services it depends on.
It tries quite hard to do this: When a service that provides a
required symbol can not be started, it will look for another service
that also provides this symbol, until starting one such service
succeeds. There is some room for theoretical improvement here, of
course, but in practice the current strategy already works very well.
This method returns the new value of the running slot
Slots of services, which is #f if the service could not
be started.
This will stop the service obj, trying to stop services that
depend in it first, so they can be shutdown cleanly. If this will
fail, it will continue anyway. Stopping of services should usually
succeed, though. Otherwise, the behaviour is very similar to the
start method. The return value is also the new running
value, thus #f if the service was stopped.
Calls the action the-action (a symbol) of the service obj, with the specified args, which have a meaning depending on the particular action.
Returns a list of the canonical names of services that conflict with the service obj.
Returns the canonical name of obj, which is the first element of
the provides list.
Returns which symbols are provided by obj.
Returns which symbols are required by obj.
Returns whether the service obj is a one-shot service.
Returns whether the service obj is running.
Returns whether the service obj should be respawned if it terminates.
Display status information about obj. This method is called
when the user performs the action status on obj, but
there is no specific implementation given for it. It is also called
when detailed-status is applied on the root service.
In addition to the facilities listed below, there are also some procedures that provide commonly needed constructors and destructors for services Service De- and Constructors.
Register all services, so that they can be taken into account when trying to resolve dependencies.
Return a list of all registered services which provide the symbol name.
This macro is used to create a value for the actions slot of a
service object Slots of services. Each name is a symbol
and each proc the corresponding procedure that will be called to
perform the action. A proc has one argument, which will be the
current value of the running slot of the service.
Start a registered service providing obj.
Start the services named by services, a list of symbols, in the background. In other words, this procedure returns immediately without waiting until all of services have been started.
This procedure can be useful in a configuration file because it lets you
interact right away with shepherd using the herd command.
Stop a registered service providing obj.
The same as the action method of class <service>, but
uses a service that provides obj and is running.
Call proc, a procedure taking one argument, once for each registered service.
Check if any of services is running. If this is the case,
return its canonical name. If not, return #f. Only the first
one will be returned; this is because this is mainly intended to be
applied on the return value of lookup-services.
All of the procedures listed below return procedures generated from the supplied arguments. These procedures take one argument in the case of destructors and no arguments in the case of constructors.
The returned procedure will execute command in a shell and
return #t if execution was successful, otherwise #f.
For convenience, it takes multiple arguments which will be
concatenated first.
Similar to make-system-constructor, but returns #f if
execution of the command was successful, #t if not.
Return a procedure that forks a child process, closes all file
descriptors except the standard output and standard error descriptors,
sets the current directory to directory, sets the umask to
file-creation-mask unless it is #f, changes the environment
to environment-variables (using the environ procedure),
sets the current user to user the current group to group
unless they are #f and supplementary groups to
supplementary-groups unless they are '(), and executes
command (a list of strings.) When
create-session? is true, the child process creates a new session with
setsid and becomes its leader. The result of the procedure will be
the PID of the child process.
Note: This will not work as expected if the process “daemonizes” (forks); in that case, you will need to pass
#:pid-file, as explained below.
When pid-file is true, it must be the name of a PID file associated with the process being launched; the return value is the PID once that file has been created. If pid-file does not show up in less than pid-file-timeout seconds, the service is considered as failing to start.
When log-file is true, it names the file to which the service’s standard output and standard error are redirected. log-file is created if it does not exist, otherwise it is appended to.
Guile’s setrlimit procedure is applied on the entries in
resource-limits. For example, a valid value would be:
'((nproc 10 100) ;number of processes (nofile 4096 4096)) ;number of open file descriptors
Return a procedure that sends signal to the process group of the PID
given as argument, where signal defaults to SIGTERM. If the
process is still running after grace-period seconds, send it
SIGKILL. The procedure returns once the process has terminated.
The make-forkexec-constructor procedure builds upon the following
procedures.
Run command as the current process from directory, with
file-creation-mask if it’s true, with rlimits, and with
environment-variables (a list of strings like "PATH=/bin".)
File descriptors 1 and 2 are kept as is or redirected to
either log-port or log-file
if it’s true, whereas file descriptor 0
(standard input) points to input-port or /dev/null; all other file descriptors
are closed prior to yielding control to command. When
create-session? is true, call setsid first
(see setsid in GNU Guile Reference Manual).
By default, command is run as the current user. If the user
keyword argument is present and not false, change to user
immediately before invoking command. user may be a string,
indicating a user name, or a number, indicating a user ID. Likewise,
command will be run under the current group, unless the
group keyword argument is present and not false, and
supplementary-groups is not '().
fork+exec-command does the same as exec-command, but in
a separate process whose PID it returns.
This parameter (see Parameters in GNU Guile Reference Manual) specifies the default list of environment variables to be defined when the procedures above create a new process.
It must be a list of strings where each string has the format
name=value. It defaults to what environ
returns when the program starts (see environ in GNU Guile Reference Manual).
This parameter (see Parameters in GNU Guile Reference Manual)
specifies the default PID file timeout in seconds, when
#:pid-file is used (see above). It defaults to 5 seconds.
This parameter (see Parameters in GNU Guile Reference Manual)
specifies the “grace period” (in seconds) after which a process that
has been sent SIGTERM or some other signal to gracefully exit is
sent SIGKILL for immediate termination. It defaults to 5
seconds.
One may also define services meant to be started on demand. In that case, shepherd listens for incoming connections on behalf of the program that handles them; when it accepts an incoming connection, it starts the program to handle them. The main benefit is that such services do not consume resources until they are actually used, and they do not slow down startup.
These services are implemented following the protocol of the venerable
inetd “super server” (see inetd in GNU
Inetutils). Many network daemons can be invoked in “inetd mode”;
this is the case, for instance, of sshd, the secure shell
server of the OpenSSH project. The Shepherd lets you define inetd-style
services, specifically those in nowait mode where the daemon is
passed the newly-accepted socket connection while shepherd is
in charge of listening.
Listening endpoints for such services are described as records built
using the endpoint procedure:
Return a new endpoint called name of address, an address as
return by make-socket-address, with the given style and
backlog.
When address is of type AF_INET6, the endpoint is
IPv6-only. Thus, if you want a service available both on IPv4
and IPv6, you need two endpoints. For example, below is a list of
endpoints to listen on port 4444 on all the network interfaces, both in
IPv4 and IPv6 (“0.0.0.0” for IPv4 and “::0” for IPv6):
(list (endpoint (make-socket-address AF_INET INADDR_ANY 4444))
(endpoint (make-socket-address AF_INET6 IN6ADDR_ANY 4444)))
This is the list you would pass to make-inetd-constructor or
make-systemd-constructor—see below.
When address is of type AF_UNIX, socket-owner and
socket-group are strings or integers that specify its ownership and that
of its parent directory; socket-directory-permissions specifies the
permissions for its parent directory.
The inetd service constructor takes a command and a list of such endpoints:
Return a procedure that opens sockets listening to endpoints, a list
of objects as returned by endpoint, and accepting connections in the
background.
Upon a client connection, a transient service running command is spawned. Only up to max-connections simultaneous connections are accepted; when that threshold is reached, new connections are immediately closed.
The remaining arguments are as for make-forkexec-constructor.
Return a procedure that terminates an inetd service.
The last type is systemd-style services. Like inetd-style services, those are started on demand when an incoming connection arrives, but using the protocol devised by the systemd service manager and referred to as socket activation. The main difference with inetd-style services is that shepherd hands over the listening socket(s) to the daemon; the daemon is then responsible for accepting incoming connections. A handful of environment variables are set in the daemon’s execution environment (see below), which usually checks them using the libsystemd or libelogind client library helper functions. The constructor and destructor for systemd-style daemons are described below.
Return a procedure that starts command, a program and list of
argument, as a systemd-style service listening on endpoints, a list of
<endpoint> objects.
command is started on demand on the first connection attempt on one of
endpoints. It is passed the listening sockets for endpoints in
file descriptors 3 and above; as such, it is equivalent to an Accept=no
systemd
socket unit. The following environment variables are set in its environment:
LISTEN_PIDIt is set to the PID of the newly spawned process.
LISTEN_FDSIt contains the number of sockets available starting from file descriptor 3—i.e., the length of endpoints.
LISTEN_FDNAMESThe colon-separated list of endpoint names.
This must be paired with make-systemd-destructor.
Return a procedure that terminates a systemd-style service as created by
make-systemd-constructor.
The configuration file of the shepherd command
(see Invoking shepherd) defines, registers, and possibly starts
services. Each service specifies other services it depends on and
how it is started and stopped. The configuration file contains Scheme
code that uses the programming interface of the (shepherd
service) module (see Services).
Let’s assume you want to define and register a service to start mcron,
the daemon that periodically executes jobs in the background
(see Introduction in GNU mcron Manual). That service is
started by invoking the mcron command, after which
shepherd should monitor the running process, possibly
re-spawning it if it stops unexpectedly. Here’s the configuration file
for this one service:
(define mcron
(make <service>
#:provides '(mcron)
;; Run /usr/bin/mcron without any command-line arguments.
#:start (make-forkexec-constructor '("/usr/bin/mcron"))
#:stop (make-kill-destructor)
#:respawn? #t))
(register-services mcron)
You can write the snippet above in the default configuration
file—~/.config/shepherd/init.scm if you run shepherd
as an unprivileged user. When you launch it, shepherd will
evaluate that configuration; thus it will define and register the
mcron service, but it will not start it. To start the
service, run:
herd start mcron
Alternatively, if you want mcron to be started automatically when
shepherd starts, you can add this snippet at the end of the
configuration file:
(start-in-the-background '(mcron))
Now let’s take another example: sshd, the secure shell daemon
of the OpenSSH project. We will pass
sshd the -D option so that it does not “detach”,
making it easy for shepherd to monitor its process; we also
tell shepherd to check its PID file to determine once it
has started and is ready to accept connections:
(define sshd
(make <service>
#:provides '(sshd ssh-daemon) ;for convenience, give it two names
#:start (make-forkexec-constructor
'("/usr/sbin/sshd" "-D")
#:pid-file "/etc/ssh/sshd.pid")
#:stop (make-kill-destructor)
#:respawn? #t))
(register-services sshd)
(start-in-the-background '(sshd))
Alternatively, we can start sshd in inetd mode: in that
case, shepherd listens for connection and spawns
sshd only upon incoming connections. The inetd mode is
enabled by passing the -i command-line option:
(define sshd
(make <service>
#:provides '(sshd ssh-daemon)
#:start (make-inetd-constructor
'("/usr/sbin/sshd" "-D" "-i")
(list (endpoint
(make-socket-address AF_INET INADDR_ANY 22))
(endpoint
(make-socket-address AF_INET6 IN6ADDR_ANY 22)))
#:max-connections 10)
#:stop (make-inetd-destructor)
#:respawn? #t))
(register-services sshd)
(start-in-the-background '(sshd))
The make-socket-address procedure calls above return the
listening addresses (see Network Socket Address in GNU
Guile Reference Manual). In this case, it specifies that
shepherd will accept connections coming from any network
interface (“0.0.0.0” in IPv4 notation and “::0” for IPv6) on port
22. The endpoint calls wrap these addresses in endpoint records
(see endpoints). When a client connects, shepherd accepts
it and spawns sshd -D -i as a new transient service,
passing it the client connection. The #:max-connections
parameter instructs shepherd to accept at most 10 simultaneous
client connections.
In these examples, we haven’t discussed dependencies among
services—the #:requires keyword of <service>—nor did
we discuss systemd-style services. These are extensions of what we’ve
seen so far. See Services, for details.
If you use Guix System, you will see that it contains a wealth of Shepherd service definitions. The nice thing is that those give you a complete view of what goes into the service—not just how the service is started and stopped, but also what software package is used and what configuration file is provided. See Shepherd Services in GNU Guix Reference Manual, for more info.
The Shepherd can be used to manage services for an unprivileged user. First, you may want to ensure it is up and running every time you log in. One way to accomplish that is by adding the following lines to ~/.bash_profile (see Bash Startup Files in The GNU Bash Reference Manual):
if [[ ! -S ${XDG_RUNTIME_DIR-$HOME/.cache}/shepherd/socket ]]; then
shepherd
fi
Then, we suggest the following top-level $XDG_CONFIG_HOME/shepherd/init.scm file, which will automatically load individual service definitions from ~/.config/shepherd/init.d:
(use-modules (shepherd service)
((ice-9 ftw) #:select (scandir)))
;; Load all the files in the directory 'init.d' with a suffix '.scm'.
(for-each
(lambda (file)
(load (string-append "init.d/" file)))
(scandir (string-append (dirname (current-filename)) "/init.d")
(lambda (file)
(string-suffix? ".scm" file))))
;; Send shepherd into the background
(action 'shepherd 'daemonize)
Then, individual user services can be put in
$XDG_CONFIG_HOME/shepherd/init.d/, e.g., for ssh-agent.
;;; Commentary:
;;;
;;; Add to your ~/.bash_profile:
;;;
;;; SSH_AUTH_SOCK=${XDG_RUNTIME_DIR-$HOME/.cache}/ssh-agent/socket
;;; export SSH_AUTH_SOCK
;;;
;;; Code:
(use-modules (shepherd support))
(define ssh-agent
(make <service>
#:provides '(ssh-agent)
#:docstring "Run `ssh-agent'"
#:start (lambda ()
(let ((socket-dir (string-append %user-runtime-dir "/ssh-agent")))
(unless (file-exists? socket-dir)
(mkdir-p socket-dir)
(chmod socket-dir #o700))
(fork+exec-command
`("ssh-agent" "-D" "-a" ,(string-append socket-dir "/socket"))
#:log-file (string-append %user-log-dir "/ssh-agent.log"))))
#:stop (make-kill-destructor)
#:respawn? #t))
(register-services ssh-agent)
(start ssh-agent)
root and unknown services ¶The service root is special, because it is used to control the
Shepherd itself. It has an alias shepherd. It provides the
following actions (in addition to enable, disable and
restart which do not make sense here).
statusDisplays which services are started and which ones are not.
detailed-statusDisplays detailed information about every registered service.
load fileEvaluate the Scheme code in file in a fresh module that uses the
(oop goops) and (shepherd services) modules—as with the
--config option of shepherd (see Invoking shepherd).
eval expLikewise, evaluate Scheme expression exp in a fresh module with all the necessary bindings.
unload service-nameAttempt to remove the service identified by service-name.
shepherd will first stop the service, if necessary, and then
remove it from the list of registered services. Any services
depending upon service-name will be stopped as part of this
process.
If service-name simply does not exist, output a warning and do
nothing. If it exists, but is provided by several services, output a
warning and do nothing. This latter case might occur for instance with
the fictional service web-server, which might be provided by both
apache and nginx. If service-name is the special
string and all, attempt to remove all services except for the Shepherd
itself.
reload file-nameUnload all known optional services using unload’s all option,
then load file-name using load functionality. If
file-name does not exist or load encounters an error, you may
end up with no defined services. As these can be reloaded at a later
stage this is not considered a problem. If the unload stage
fails, reload will not attempt to load file-name.
daemonizeFork and go into the background. This should be called before
respawnable services are started, as otherwise we would not get the
SIGCHLD signals when they terminate.
The unknown service must be defined by the user and if it
exists, is used as a fallback whenever we try to invoke an unknown
action of an existing service or use a service that does not exist.
This is useful only in few cases, but enables you to do various sorts
of unusual things.
This is a list of facilities which are available to code running inside of the Shepherd and is considered generally useful, but is not directly related to one of the other topic covered in this manual.
If expr yields #f, display an appropriate error
message and throw an assertion-failed exception.
Tell the Shepherd that a key error with args has occurred. This is the simplest way to cause caught error result in uniformly formatted warning messages. The current implementation is not very good, though.
Evaluates the exprs, not going further if a system error occurs, but also doing nothing about it.
The (shepherd comm) module provides primitives that allow clients such
as herd to connect to shepherd and send it commands to
control or change its behavior (see actions of
services).
Currently, clients may only send commands, represented by the
<shepherd-command> type. Each command specifies a service it
applies to, an action name, a list of strings to be used as arguments,
and a working directory. Commands are instantiated with
shepherd-command:
Return a new command (a <shepherd-command>) object for
action on service.
Commands may then be written to or read from a communication channel with the following procedures:
Write command to port.
Receive a command from port and return it.
In practice, communication with shepherd takes place over a
Unix-domain socket, as discussed earlier (see Invoking shepherd).
Clients may open a connection with the procedure below.
Open a connection to the daemon, using the Unix-domain socket at file, and return the socket.
When file is omitted, the default socket is used.
The daemon writes output to be logged or passed to the
currently-connected client using local-output:
This procedure should be used for all output operations in the Shepherd. It outputs the args according to the format-string, then inserts a newline. It writes to whatever is the main output target of the Shepherd, which might be multiple at the same time in future versions.
Under the hood, write-command and read-command write/read
commands as s-expressions (sexps). Each sexp is intelligible and
specifies a protocol version. The idea is that users can write their
own clients rather than having to invoke herd. For instance,
when you type herd status, what is sent over the wire is the
following sexp:
(shepherd-command (version 0) (action status) (service root) (arguments ()) (directory "/data/src/dmd"))
The reply is also an sexp, along these lines:
(reply (version 0)
(result (((service ...) ...)))
(error #f) (messages ()))
This reply indicates that the status action was successful,
because error is #f, and gives a list of sexps denoting
the status of services as its result. The messages field
is a possibly-empty list of strings meant to be displayed as is to the
user.
This chapter contains information about the design and the implementation details of the Shepherd for people who want to hack it.
The GNU Shepherd is developed by a group of people in connection with Guix System, GNU’s advanced distribution, but it can be used on other distros as well. You’re very much welcome to join us! You can report bugs to bug-guix@gnu.org and send patches or suggestions to guix-devel@gnu.org.
About formatting: Use common sense and GNU Emacs (which actually is the same, of course), and you almost can’t get the formatting wrong. Formatting should be as in Guile and Guix, basically. See Coding Style in GNU Guix Reference Manual, for more info.
Note: This section was written by Wolfgang Jährling back in 2003 and documents the original design of what was then known as GNU dmd. The main ideas remain valid but some implementation details and goals have changed.
The general idea of a service manager that uses dependencies, similar to those of a Makefile, came from the developers of the GNU Hurd, but as few people are satisfied with System V Init, many other people had the same idea independently. Nevertheless, the Shepherd was written with the goal of becoming a replacement for System V Init on GNU/Hurd, which was one of the reasons for choosing the extension language of the GNU project, Guile, for implementation (another reason being that it makes it just so much easier).
The runlevel concept (i.e. thinking in groups of services) is
sometimes useful, but often one also wants to operate on single
services. System V Init makes this hard: While you can start and stop
a service, init will not know about it, and use the runlevel
configuration as its source of information, opening the door for
inconsistencies (which fortunately are not a practical problem
usually). In the Shepherd, this was avoided by having a central entity that is
responsible for starting and stopping the services, which therefore
knows which services are actually started (if not completely
improperly used, but that is a requirement which is impossible to
avoid anyway). While runlevels are not implemented yet, it is clear
that they will sit on top of the service concept, i.e. runlevels will
merely be an optional extension that the service concept does not rely
on. This also makes changes in the runlevel design easier when it may
become necessary.
The consequence of having a daemon running that controls the services is that we need another program as user interface which communicates with the daemon. Fortunately, this makes the commands necessary for controlling services pretty short and intuitive, and gives the additional bonus of adding some more flexibility. For example, it is easiely possible to grant password-protected control over certain services to unprivileged users, if desired.
An essential aspect of the design of the Shepherd (which was already mentioned above) is that it should always know exactly what is happening, i.e. which services are started and stopped. The alternative would have been to not use a daemon, but to save the state on the file system, again opening the door for inconsistencies of all sorts. Also, we would have to use a separate program for respawning a service (which just starts the services, waits until it terminates and then starts it again). Killing the program that does the respawning (but not the service that is supposed to be respawned) would cause horrible confusion. My understanding of “The Right Thing” is that this conceptionally limited strategy is exactly what we do not want.
The way dependencies work in the Shepherd took a while to mature, as it was not easy to figure out what is appropriate. I decided to not make it too sophisticated by trying to guess what the user might want just to theoretically fulfill the request we are processing. If something goes wrong, it is usually better to tell the user about the problem and let her fix it, taking care to make finding solutions or workarounds for problems (like a misconfigured service) easy. This way, the user is in control of what happens and we can keep the implementation simple. To make a long story short, we don’t try to be too clever, which is usually a good idea in developing software.
If you wonder why I was giving a “misconfigured service” as an example above, consider the following situation, which actually is a wonderful example for what was said in the previous paragraph: Service X depends on symbol S, which is provided by both A and B. A depends on AA, B depends on BB. AA and BB conflict with each other. The configuration of A contains an error, which will prevent it from starting; no service is running, but we want to start X now. In resolving its dependencies, we first try to start A, which will cause AA to be started. After this is done, the attempt of starting A fails, so we go on to B, but its dependency BB will fail to start because it conflicts with the running service AA. So we fail to provide S, thus X cannot be started. There are several possibilities to deal with this:
I hope you can agree that the latter solution after all is the best one, because we can be sure to not do something that the user does not want us to do. Software should not run amok. This explanation was very long, but I think it was necessary to justify why the Shepherd uses a very primitive algorithm to resolve dependencies, despite the fact that it could theoretically be a bit more clever in certain situations.
One might argue that it is possible to ask the user if the planned actions are ok with her, and if the plan changes ask again, but especially given that services are supposed to usually work, I see few reasons to make the source code of the Shepherd more complicated than necessary. If you volunteer to write and maintain a more clever strategy (and volunteer to explain it to everyone who wants to understand it), you are welcome to do so, of course…
Copyright © 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc. http://fsf.org/ Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
The purpose of this License is to make a manual, textbook, or other functional and useful document free in the sense of freedom: to assure everyone the effective freedom to copy and redistribute it, with or without modifying it, either commercially or noncommercially. Secondarily, this License preserves for the author and publisher a way to get credit for their work, while not being considered responsible for modifications made by others.
This License is a kind of “copyleft”, which means that derivative works of the document must themselves be free in the same sense. It complements the GNU General Public License, which is a copyleft license designed for free software.
We have designed this License in order to use it for manuals for free software, because free software needs free documentation: a free program should come with manuals providing the same freedoms that the software does. But this License is not limited to software manuals; it can be used for any textual work, regardless of subject matter or whether it is published as a printed book. We recommend this License principally for works whose purpose is instruction or reference.
This License applies to any manual or other work, in any medium, that contains a notice placed by the copyright holder saying it can be distributed under the terms of this License. Such a notice grants a world-wide, royalty-free license, unlimited in duration, to use that work under the conditions stated herein. The “Document”, below, refers to any such manual or work. Any member of the public is a licensee, and is addressed as “you”. You accept the license if you copy, modify or distribute the work in a way requiring permission under copyright law.
A “Modified Version” of the Document means any work containing the Document or a portion of it, either copied verbatim, or with modifications and/or translated into another language.
A “Secondary Section” is a named appendix or a front-matter section of the Document that deals exclusively with the relationship of the publishers or authors of the Document to the Document’s overall subject (or to related matters) and contains nothing that could fall directly within that overall subject. (Thus, if the Document is in part a textbook of mathematics, a Secondary Section may not explain any mathematics.) The relationship could be a matter of historical connection with the subject or with related matters, or of legal, commercial, philosophical, ethical or political position regarding them.
The “Invariant Sections” are certain Secondary Sections whose titles are designated, as being those of Invariant Sections, in the notice that says that the Document is released under this License. If a section does not fit the above definition of Secondary then it is not allowed to be designated as Invariant. The Document may contain zero Invariant Sections. If the Document does not identify any Invariant Sections then there are none.
The “Cover Texts” are certain short passages of text that are listed, as Front-Cover Texts or Back-Cover Texts, in the notice that says that the Document is released under this License. A Front-Cover Text may be at most 5 words, and a Back-Cover Text may be at most 25 words.
A “Transparent” copy of the Document means a machine-readable copy, represented in a format whose specification is available to the general public, that is suitable for revising the document straightforwardly with generic text editors or (for images composed of pixels) generic paint programs or (for drawings) some widely available drawing editor, and that is suitable for input to text formatters or for automatic translation to a variety of formats suitable for input to text formatters. A copy made in an otherwise Transparent file format whose markup, or absence of markup, has been arranged to thwart or discourage subsequent modification by readers is not Transparent. An image format is not Transparent if used for any substantial amount of text. A copy that is not “Transparent” is called “Opaque”.
Examples of suitable formats for Transparent copies include plain ASCII without markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly available DTD, and standard-conforming simple HTML, PostScript or PDF designed for human modification. Examples of transparent image formats include PNG, XCF and JPG. Opaque formats include proprietary formats that can be read and edited only by proprietary word processors, SGML or XML for which the DTD and/or processing tools are not generally available, and the machine-generated HTML, PostScript or PDF produced by some word processors for output purposes only.
The “Title Page” means, for a printed book, the title page itself, plus such following pages as are needed to hold, legibly, the material this License requires to appear in the title page. For works in formats which do not have any title page as such, “Title Page” means the text near the most prominent appearance of the work’s title, preceding the beginning of the body of the text.
The “publisher” means any person or entity that distributes copies of the Document to the public.
A section “Entitled XYZ” means a named subunit of the Document whose title either is precisely XYZ or contains XYZ in parentheses following text that translates XYZ in another language. (Here XYZ stands for a specific section name mentioned below, such as “Acknowledgements”, “Dedications”, “Endorsements”, or “History”.) To “Preserve the Title” of such a section when you modify the Document means that it remains a section “Entitled XYZ” according to this definition.
The Document may include Warranty Disclaimers next to the notice which states that this License applies to the Document. These Warranty Disclaimers are considered to be included by reference in this License, but only as regards disclaiming warranties: any other implication that these Warranty Disclaimers may have is void and has no effect on the meaning of this License.
You may copy and distribute the Document in any medium, either commercially or noncommercially, provided that this License, the copyright notices, and the license notice saying this License applies to the Document are reproduced in all copies, and that you add no other conditions whatsoever to those of this License. You may not use technical measures to obstruct or control the reading or further copying of the copies you make or distribute. However, you may accept compensation in exchange for copies. If you distribute a large enough number of copies you must also follow the conditions in section 3.
You may also lend copies, under the same conditions stated above, and you may publicly display copies.
If you publish printed copies (or copies in media that commonly have printed covers) of the Document, numbering more than 100, and the Document’s license notice requires Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must present the full title with all words of the title equally prominent and visible. You may add other material on the covers in addition. Copying with changes limited to the covers, as long as they preserve the title of the Document and satisfy these conditions, can be treated as verbatim copying in other respects.
If the required texts for either cover are too voluminous to fit legibly, you should put the first ones listed (as many as fit reasonably) on the actual cover, and continue the rest onto adjacent pages.
If you publish or distribute Opaque copies of the Document numbering more than 100, you must either include a machine-readable Transparent copy along with each Opaque copy, or state in or with each Opaque copy a computer-network location from which the general network-using public has access to download using public-standard network protocols a complete Transparent copy of the Document, free of added material. If you use the latter option, you must take reasonably prudent steps, when you begin distribution of Opaque copies in quantity, to ensure that this Transparent copy will remain thus accessible at the stated location until at least one year after the last time you distribute an Opaque copy (directly or through your agents or retailers) of that edition to the public.
It is requested, but not required, that you contact the authors of the Document well before redistributing any large number of copies, to give them a chance to provide you with an updated version of the Document.
You may copy and distribute a Modified Version of the Document under the conditions of sections 2 and 3 above, provided that you release the Modified Version under precisely this License, with the Modified Version filling the role of the Document, thus licensing distribution and modification of the Modified Version to whoever possesses a copy of it. In addition, you must do these things in the Modified Version:
If the Modified Version includes new front-matter sections or appendices that qualify as Secondary Sections and contain no material copied from the Document, you may at your option designate some or all of these sections as invariant. To do this, add their titles to the list of Invariant Sections in the Modified Version’s license notice. These titles must be distinct from any other section titles.
You may add a section Entitled “Endorsements”, provided it contains nothing but endorsements of your Modified Version by various parties—for example, statements of peer review or that the text has been approved by an organization as the authoritative definition of a standard.
You may add a passage of up to five words as a Front-Cover Text, and a passage of up to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be added by (or through arrangements made by) any one entity. If the Document already includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you are acting on behalf of, you may not add another; but you may replace the old one, on explicit permission from the previous publisher that added the old one.
The author(s) and publisher(s) of the Document do not by this License give permission to use their names for publicity for or to assert or imply endorsement of any Modified Version.
You may combine the Document with other documents released under this License, under the terms defined in section 4 above for modified versions, provided that you include in the combination all of the Invariant Sections of all of the original documents, unmodified, and list them all as Invariant Sections of your combined work in its license notice, and that you preserve all their Warranty Disclaimers.
The combined work need only contain one copy of this License, and multiple identical Invariant Sections may be replaced with a single copy. If there are multiple Invariant Sections with the same name but different contents, make the title of each such section unique by adding at the end of it, in parentheses, the name of the original author or publisher of that section if known, or else a unique number. Make the same adjustment to the section titles in the list of Invariant Sections in the license notice of the combined work.
In the combination, you must combine any sections Entitled “History” in the various original documents, forming one section Entitled “History”; likewise combine any sections Entitled “Acknowledgements”, and any sections Entitled “Dedications”. You must delete all sections Entitled “Endorsements.”
You may make a collection consisting of the Document and other documents released under this License, and replace the individual copies of this License in the various documents with a single copy that is included in the collection, provided that you follow the rules of this License for verbatim copying of each of the documents in all other respects.
You may extract a single document from such a collection, and distribute it individually under this License, provided you insert a copy of this License into the extracted document, and follow this License in all other respects regarding verbatim copying of that document.
A compilation of the Document or its derivatives with other separate and independent documents or works, in or on a volume of a storage or distribution medium, is called an “aggregate” if the copyright resulting from the compilation is not used to limit the legal rights of the compilation’s users beyond what the individual works permit. When the Document is included in an aggregate, this License does not apply to the other works in the aggregate which are not themselves derivative works of the Document.
If the Cover Text requirement of section 3 is applicable to these copies of the Document, then if the Document is less than one half of the entire aggregate, the Document’s Cover Texts may be placed on covers that bracket the Document within the aggregate, or the electronic equivalent of covers if the Document is in electronic form. Otherwise they must appear on printed covers that bracket the whole aggregate.
Translation is considered a kind of modification, so you may distribute translations of the Document under the terms of section 4. Replacing Invariant Sections with translations requires special permission from their copyright holders, but you may include translations of some or all Invariant Sections in addition to the original versions of these Invariant Sections. You may include a translation of this License, and all the license notices in the Document, and any Warranty Disclaimers, provided that you also include the original English version of this License and the original versions of those notices and disclaimers. In case of a disagreement between the translation and the original version of this License or a notice or disclaimer, the original version will prevail.
If a section in the Document is Entitled “Acknowledgements”, “Dedications”, or “History”, the requirement (section 4) to Preserve its Title (section 1) will typically require changing the actual title.
You may not copy, modify, sublicense, or distribute the Document except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, or distribute it is void, and will automatically terminate your rights under this License.
However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice.
Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, receipt of a copy of some or all of the same material does not give you any rights to use it.
The Free Software Foundation may publish new, revised versions of the GNU Free Documentation License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. See http://www.gnu.org/copyleft/.
Each version of the License is given a distinguishing version number. If the Document specifies that a particular numbered version of this License “or any later version” applies to it, you have the option of following the terms and conditions either of that specified version or of any later version that has been published (not as a draft) by the Free Software Foundation. If the Document does not specify a version number of this License, you may choose any version ever published (not as a draft) by the Free Software Foundation. If the Document specifies that a proxy can decide which future versions of this License can be used, that proxy’s public statement of acceptance of a version permanently authorizes you to choose that version for the Document.
“Massive Multiauthor Collaboration Site” (or “MMC Site”) means any World Wide Web server that publishes copyrightable works and also provides prominent facilities for anybody to edit those works. A public wiki that anybody can edit is an example of such a server. A “Massive Multiauthor Collaboration” (or “MMC”) contained in the site means any set of copyrightable works thus published on the MMC site.
“CC-BY-SA” means the Creative Commons Attribution-Share Alike 3.0 license published by Creative Commons Corporation, a not-for-profit corporation with a principal place of business in San Francisco, California, as well as future copyleft versions of that license published by that same organization.
“Incorporate” means to publish or republish a Document, in whole or in part, as part of another Document.
An MMC is “eligible for relicensing” if it is licensed under this License, and if all works that were first published under this License somewhere other than this MMC, and subsequently incorporated in whole or in part into the MMC, (1) had no cover texts or invariant sections, and (2) were thus incorporated prior to November 1, 2008.
The operator of an MMC Site may republish an MMC contained in the site under CC-BY-SA on the same site at any time before August 1, 2009, provided the MMC is eligible for relicensing.
To use this License in a document you have written, include a copy of the License in the document and put the following copyright and license notices just after the title page:
Copyright (C) year your name. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled ``GNU Free Documentation License''.
If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, replace the “with…Texts.” line with this:
with the Invariant Sections being list their titles, with
the Front-Cover Texts being list, and with the Back-Cover Texts
being list.
If you have Invariant Sections without Cover Texts, or some other combination of the three, merge those two alternatives to suit the situation.
If your document contains nontrivial examples of program code, we recommend releasing these examples in parallel under your choice of free software license, such as the GNU General Public License, to permit their use in free software.
| Index Entry | Section | |
|---|---|---|
| < | ||
<service> | Services | |
<shepherd-command> | Communication | |
In the past, when the
GNU Shepherd was known as GNU dmd, the herd command
was called deco, for DaEmon COntroller.
On GNU/Linux, the /run/user/uid directory is typically created by elogind or by systemd, which are available in most distributions.
This
shorthand does not work for other actions such as stop, because
inadvertently typing herd stop would stop all the services, which
could be pretty annoying.